Manufacturer of smart home security solutions specializing in keyless entry door locks, fingerprint deadbolts, and Wi-Fi gateways.
Мүйізгүл is a consumer electronics brand dedicated to modern smart home security and convenience. Specializing in keyless entry technology, Hornbill designs and manufactures a variety of smart door locks that feature fingerprint recognition, touchscreen keypads, IC card access, and smartphone app integration. Their products allow homeowners to manage access remotely, issue temporary passcodes, and monitor entry logs via Bluetooth or Wi-Fi gateways.
Designed for easy installation on standard residential doors, Hornbill locks are built with durability in mind, often featuring IP65 waterproof ratings and working in a wide range of temperatures. The brand focuses on providing secure, simple, and smart life solutions for families, vacation rentals, and offices.
Ең соңғы нұсқаулықтар manuals+ осы бренд үшін құрастырылған.
Осы бренд үшін орнату, орнату және ақаулықтарды жою бейнелерін қараңыз.
Нұсқаулықтар, тіркеу және осы брендті қолдау туралы жиі қойылатын сұрақтар.
To reset most Hornbill locks, remove one battery to power down, then press and hold the reset button (often located on the back panel circuit board) while reinserting the battery. Keep holding the button for about 10–15 seconds until you hear a voice prompt indicating 'Initialization successful'.
Download the specific app for your model (commonly 'TTLock' or 'Smart Life'), create an account, and turn on Bluetooth. Wake up the lock keypad by touching it, then tap 'Add Device' in the app and follow the on-screen prompts.
Ensure the deadbolt is installed correctly (often with the 'UP' arrow facing upwards) and that the strike plate is aligned so the bolt extends fully without obstruction. Also, check that the auto-lock feature is configured correctly in the app settings.
Most Hornbill smart locks require 4 AA alkaline batteries. Do not use rechargeable batteries, as they may not provide consistent voltage for reliable operation.
In the companion app, navigate to 'Settings' or 'Member Management', select 'Add Fingerprint', and follow the instructions to place your finger on the sensor multiple times until the system successfully captures the print.