1. Кіріспе
The XH-M609 module is a versatile battery protection board designed to prevent over-discharge, over-charge, over-current, and short-circuit conditions for various battery types. It features an LED digital display for easy monitoring and two buttons for setting protection and return difference values. This manual provides detailed instructions for its installation, operation, and maintenance.
2. Қауіпсіздік туралы ақпарат
- Ensure correct polarity when connecting the battery and load to avoid damage to the module or connected devices.
- Көрсетілген көлемде жұмыс істеңізtage диапазоны (тұрақты ток 12V-36V).
- Do not exceed the maximum current rating of the relay (20A 14VDC / 20A 125VAC).
- Модульді ылғалдан, шаңнан және жоғары температурадан алыс ұстаңыз.
- If you are unsure about any connection or setting, consult a qualified electrician or refer to the official user manual PDF for more details.
3. Техникалық сипаттамалар
| Ерекшелік | Мән |
|---|---|
| Үлгі нөмірі | XH-M609 |
| Түр | Батареяны қорғау модулі |
| Жабдықтау көлеміtage | Тұрақты ток 12В-36В |
| Шығу көлеміtage | Equal to Supply Voltage |
| Бақылау дәлдігі | 0.1В |
| Қуатты тұтыну | <1.5 Вт |
| Қолдану аясы | Various batteries (e.g., lithium battery) |
| Өнім өлшемі | Approx. 57 x 42 x 19mm (2.2 x 1.7 x 0.7in) |
| Реле рейтингі | 20A 14VDC / 20A 125VAC |
4. Өнім аяқталдыview
The XH-M609 module features input (VIN) and output (VOUT) terminals, an LED digital display, and two control buttons ('+' and '-'). A relay is integrated for switching the output power.
5. Орнату және сымдар
Refer to Figure 1 for the wiring diagram. Ensure all connections are secure and observe correct polarity.
- Connect Storage Battery: Connect your 12-36V storage battery to the VIN terminals. The positive (+) terminal of the battery connects to the '+' terminal of VIN, and the negative (-) terminal connects to the '-' terminal of VIN.
- Connect Output Power Supply (Load): Connect your load (e.g., output power supply, pump) to the ҚҰРАСТЫРУ terminals. The positive (+) terminal of the load connects to the '+' terminal of VOUT, and the negative (-) terminal connects to the '-' terminal of VOUT.
Caution: Incorrect wiring can damage the module or connected devices. Double-check all connections before applying power.
6. Операция
The module's functions are controlled via the two buttons ('+' and '-') and the LED display.
- Display Protection Value: Short press the "+" button once to display the current protection value.
- Set Protection Value: Long press the "+" button to enter setting mode for the protection value. Use the "+" and "-" buttons to adjust the value. The module will save the setting automatically after a few seconds of inactivity.
- Display Return Difference Value: Short press the "-" button once to display the current return difference value.
- Set Return Difference Value: Long press the "-" button to enter setting mode for the return difference value. Use the "+" and "-" buttons to adjust the value. The module will save the setting automatically after a few seconds of inactivity.
- Relay Activation: Қажетті дыбыс деңгейін орнатқаннан кейінtage levels, the module will automatically activate the relay (LED light on, output voltage present) when the input voltage is above the set protection value.
- Relay Deactivation: Кіріс көлемі қашанtage drops below the set protection value, the relay will stop working (LED off, no voltage output) to protect the battery from over-discharge.
- Мәжбүрлі іске қосу: If the output load is too high and the voltage is not sufficient to initiate the load, you can press one of the buttons (often a short press of the '+' button) to attempt a forced start.
7. Техникалық қызмет көрсету
- Модульді таза және шаңнан таза ұстаңыз.
- Модульге судың немесе басқа сұйықтықтардың әсерін тигізбеңіз.
- Regularly check wiring connections for looseness or corrosion.
- Ensure adequate ventilation around the module to prevent overheating.
8. Ақаулықтарды жою
- No Output / Relay Not Activating:
- Check if the input battery voltage is above the set protection value.
- Барлық сым қосылымдарының дұрыс және қауіпсіз екенін тексеріңіз.
- Ensure the load is not drawing excessive current beyond the relay's capacity.
- Module Not Responding to Button Presses:
- Ensure the module is powered correctly.
- Check for any physical damage to the buttons.
- Параметрлер сақталмайды:
- The module typically saves settings automatically after a few seconds of inactivity in setting mode. Ensure you allow enough time.
- Settings are generally retained even after power is turned off.
9. Пайдаланушы кеңестері
- This module is compatible with a wide range of batteries, including gel, acid, and 18650 lithium battery packs.
- The settings configured on the module are non-volatile and will be retained even after the power supply is disconnected.
- If you encounter issues with a high output load not starting, try the 'forced start' option by pressing one of the control buttons after ensuring all other conditions are met.
10. Кепілдік және қолдау
For specific warranty information, please refer to the product's purchase documentation or contact the seller directly. For additional technical support or detailed instructions, you may refer to the official user manual PDF available at: XH-M609 User Manual (PDF).
