1. Кіріспе
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your TOMZN TOQ7e WiFi Smart Automatic Transfer Switch (ATS). Please read this manual thoroughly before installation and keep it for future reference.
The TOMZN TOQ7e is designed to automatically switch between two power sources, typically city power (Source A) and a generator or secondary power source (Source B), ensuring a continuous power supply to your electrical load. It features WiFi connectivity for smart control and monitoring via the EWelink application.
2. Қауіпсіздік туралы ақпарат
Improper installation or operation can lead to serious injury or damage to the device. Always adhere to the following safety guidelines:
- Кәсіби орнату ұсынылады: Орнатуды тек барлық жергілікті және ұлттық электр ережелеріне сәйкес білікті электрик орындауы керек.
- Қуатты ажырату: Always ensure that all power sources are disconnected before performing any installation, wiring, or maintenance.
- Тtage және Ағымдағы рейтингтер: Verify that the device's voltage and current ratings match your electrical system requirements.
- Дұрыс жерге қосу: Ensure the device is properly grounded to prevent electrical shock.
- Қоршаған орта жағдайлары: Do not expose the device to excessive moisture, dust, or extreme temperatures outside its specified operating range.
- Қауіпсіз қосылымдар: Ensure all wire connections are tight and secure to prevent overheating and arcing.
3. Өнім аяқталдыview
The TOMZN TOQ7e ATS is a compact and intelligent device designed for reliable power transfer. It integrates automatic switching capabilities with smart home features.
1-сурет: Алдыңғы view of the TOMZN TOQ7e ATS, showing the manual/auto selector, indicator lights, and terminal connections.
Figure 2: Multiple TOMZN TOQ7e ATS units, illustrating various pole configurations and current ratings.
Негізгі компоненттер:
- Power Source A (City Power) Terminals: Connections for the primary power supply.
- Power Source B (Generator) Terminals: Connections for the secondary power supply.
- Жүктеу терминалдары: Output connections to the electrical load.
- Manual/Auto Selector Switch: Allows selection between manual operation and automatic transfer mode.
- Индикатор шамдары: Display the status of Source A, Source B, and the current power supply.
- WiFi модулі: Enables smart control and monitoring via the EWelink app.
4. Техникалық сипаттамалар
| Ерекшелік | Техникалық сипаттама |
|---|---|
| Үлгі | TOQ7e |
| Номиналды ток | 63A, 100A, 125A (variant dependent) |
| Бағаланған томtage | 220В / 380В айнымалы ток |
| поляктар | 2P, 3P, 4P (variant dependent) |
| Басқару түрі | Automatic, Manual, WiFi (EWelink) |
| Қорғау мүмкіндіктері | Short Circuit, Overload |
| Тұрғын үй материалы | Insulating, Flame-retardant, UV-resistant |
| Терминалдар | Бұрандалы түрі |
| Сертификаттау | CE |
| Жұмыс жиілігі | 50/60 Гц |
| Өлшемдері (шамамен) | Refer to product packaging or specific model datasheet for precise measurements. |
5. Орнату
Ескерту: Ensure all power is disconnected before proceeding with installation. Installation must be performed by a qualified electrician.
5.1 Монтаждау
The TOMZN TOQ7e ATS is designed for DIN rail mounting.
- Select a suitable location within your electrical panel or enclosure that provides adequate ventilation and protection from environmental factors.
- Attach the ATS securely to a standard DIN rail by engaging the mounting clip at the bottom of the device.
3-сурет: Төменгі view of the TOMZN TOQ7e ATS, showing the DIN rail mounting clip for secure installation.
5.2 Электр желілері
Follow the wiring diagram provided with your specific product variant or consult a qualified electrician. The general wiring principle involves connecting Source A (City Power), Source B (Generator), and the Load to their respective terminals.
- Source A (City Power): Connect the main utility power lines to the 'Source A' input terminals.
- Source B (Generator/Secondary Power): Connect the generator or secondary power lines to the 'Source B' input terminals.
- Жүктеме: Connect the electrical circuits or appliances you wish to power to the 'Load' output terminals.
- Ensure correct phase and neutral connections.
- Tighten all screw terminals firmly to prevent loose connections and potential hazards.
6. Пайдалану нұсқаулары
6.1 Қолмен пайдалану
The ATS can be manually switched between power sources using the selector switch on the front panel.
- Ensure the selector switch is in the 'Manual' position.
- Rotate the switch to select either 'Source A' or 'Source B' to supply power to the load.
- Observe the indicator lights to confirm the active power source.
6.2 Автоматты жұмыс
For automatic power transfer, set the selector switch to the 'Auto' position.
- When 'Source A' (City Power) is available, the ATS will automatically connect the load to Source A.
- If 'Source A' fails, the ATS will detect the outage and, after a pre-set delay, automatically switch the load to 'Source B' (Generator), provided Source B is available and stable.
- When 'Source A' is restored, the ATS will automatically switch the load back to Source A after a pre-set delay.
- Indicator lights will show the status of each source and which source is currently supplying power.
6.3 WiFi Connectivity and EWelink App
The TOMZN TOQ7e integrates with the EWelink app for remote monitoring and control.
- Download EWelink App: Download the EWelink app from your smartphone's app store (iOS or Android).
- Тіркелу/Кіру: Create an account or log in to your existing EWelink account.
- Құрылғыны қосу: Follow the in-app instructions to add a new device. This typically involves putting the ATS into pairing mode (refer to the device's specific pairing instructions, usually by pressing and holding a button) and connecting to your home WiFi network.
- Қашықтан басқару және бақылау: Once connected, you can monitor the status of both power sources, view current power usage (if supported by the specific model), and remotely switch between manual and auto modes, or even trigger a manual transfer.
- Таймер функциялары: Utilize the app's timer features to schedule power transfers or monitor events.
7. Техникалық қызмет көрсету
Regular maintenance ensures the longevity and reliable operation of your ATS.
- Мерзімді тексеру: Annually inspect the device for any signs of physical damage, loose connections, or discoloration.
- Тазалық: Құрылғыны шаң мен қоқыстардан таза ұстаңыз. Тазалау үшін құрғақ, жұмсақ шүберекті пайдаланыңыз. Сұйық тазалағыштарды пайдаланбаңыз.
- Терминалдың тығыздығы: Periodically check and re-tighten all screw terminals to ensure secure electrical connections.
- Функционалдық сынағы: Periodically test the automatic transfer function by simulating a power outage (e.g., by temporarily disconnecting Source A, if safe to do so and with proper precautions).
8. Ақаулықтарды жою
If you encounter issues with your TOMZN TOQ7e ATS, refer to the following troubleshooting guide:
| Мәселе | Ықтимал себебі | Шешім |
|---|---|---|
| Device not switching automatically | Selector switch in 'Manual' position. One or both power sources unavailable/unstable. | Set selector to 'Auto'. Check power supply to Source A and Source B. Ensure generator is running and stable. |
| No power output to load | No active power source. Overload or short circuit tripped internal protection. Loose wiring. | Verify both Source A and Source B are active. Check for tripped circuit breakers upstream. Inspect and tighten all wiring connections. |
| WiFi байланысы мәселелері | Incorrect WiFi password. Device too far from router. Router issues. | Ensure correct WiFi password. Move device closer to router or use a WiFi extender. Restart router. Re-attempt pairing process. |
| Индикатор шамдары жұмыс істемейді | No power to the device. Faulty unit. | Check power supply. If power is present and lights are still off, contact support. |
If the problem persists after attempting these solutions, contact customer support or a qualified electrician.
9. Кепілдік және қолдау
For warranty information, technical support, or service inquiries, please refer to the documentation provided at the point of purchase or contact your seller directly. Ensure you have your product model number and purchase date available when contacting support.
