SUNLU S4 Filament Dryer User Manual

1. Кіріспе

Thank you for choosing the SUNLU S4 Filament Dryer. This device is designed to effectively dry 3D printer filaments, improving print quality and preventing common issues caused by moisture absorption. The S4 features a large capacity for up to four 1KG spools, rapid heating, uniform drying with triple fans, and intelligent humidity control for optimal filament conditioning.

2. Қауіпсіздік нұсқаулары

• Құрылғыны іске қоспас бұрын барлық нұсқауларды оқып шығыңыз.
• Қуат көзі көлемін қамтамасыз етіңізtage matches the specifications indicated on the device.
• Құрылғыны дымқыл қолмен немесе дamp орталар.
• Құрылғыны тез тұтанатын материалдардан және жылу көздерінен алыс ұстаңыз.
• Жұмыс кезінде желдету саңылауларын жаппаңыз.
• Құрылғыны пайдаланбаған кезде немесе тазалау алдында розеткадан ажыратыңыз.
• Құрылғыны өзіңіз бөлшектеуге немесе жөндеуге әрекеттенбеңіз. Көмек алу үшін тұтынушыларды қолдау қызметіне хабарласыңыз.
• Балалардың қолы жетпейтін жерде сақтаңыз.

3. Пакет мазмұны

Пакетте келесі элементтердің бар-жоғын тексеріңіз:

• SUNLU S4 Filament Dryer Unit
• Қуат адаптері
• Пайдаланушы нұсқаулығы (бұл құжат)
• 1KG White High Speed PLA+2.0 Filament (bundled item)

4. Өнім аяқталдыview

The SUNLU S4 Filament Dryer is designed to provide optimal drying conditions for various 3D printing filaments. Key features include:

• Үлкен сыйымдылық: Accommodates up to four 1KG spools simultaneously, enabling multi-color or multi-machine printing without interruption.
• Жылдам қыздыру: Equipped with a 350W PTC heater, the S4 heats from 25℃ to 50℃ in approximately 30 minutes, ensuring efficient drying.
• Uniform Drying: Three built-in fans (two circulating on sides, one on bottom) maintain a temperature balance within ±3℃ for consistent drying throughout the box.
• Triple Security: Features PTC, temperature switch, and software protection for enhanced safety and real-time temperature monitoring.
• Smart Auto Humidity Control: Allows users to set a desired humidity range (30%~50%). The dryer automatically starts drying when humidity exceeds the set range and stops when it falls below 25% to prevent over-drying.

Image: The SUNLU S4 Filament Dryer highlighting its main features including large space, efficiency, fast heating, temperature balance, universal compatibility, and auto humidity control.

Сурет: ішкі view of the SUNLU S4 Filament Dryer demonstrating its capacity to hold four 1KG filament spools, with arrows indicating airflow for drying.

Image: A visual comparison showing a 3D printed object made with wet filament (left, rough surface) versus the same object made with dried filament (right, smooth surface), illustrating the benefits of drying.

Image: A graph illustrating the rapid heating capability of the SUNLU S4, showing it reaches 50°C from 25°C in approximately 30 minutes, significantly faster than previous models.

Image: An illustration depicting the three internal fans of the SUNLU S4, highlighting their role in circulating air for uniform and 360-degree drying of filament.

Image: A diagram showing the triple security features of the S4: Smart PTC, Temperature Switch, and Software Protection, ensuring safe operation with real-time temperature monitoring.

Image: The control panel display of the SUNLU S4, showing current temperature (PV), set temperature (SV), relative humidity (RH), and mode (MO). It also illustrates the auto humidity control logic for starting and stopping drying.

5. Орнату

1. Қаптамадан шығару: Carefully remove the SUNLU S4 Filament Dryer and all accessories from the packaging.
2. Орналастыру: Place the dryer on a stable, flat, and heat-resistant surface, ensuring adequate ventilation around the unit.
3. Жіпті жүктеңіз: Open the lid of the dryer. Place up to four 1KG filament spools onto the internal rollers. Ensure the filament can unroll smoothly.
4. Қуатты қосу: Plug the power adapter into the dryer's power input port, then connect the adapter to a suitable power outlet.
5. Қуат қосулы: Press the power button to turn on the device. The display will illuminate.

6. Пайдалану нұсқаулары

The SUNLU S4 offers various modes for drying filament. Refer to the display and control buttons for operation.

6.1. Негізгі операция

• Қуатты қосу/өшіру: Құрылғыны қосу немесе өшіру үшін қуат түймесін басыңыз.
• Temperature Setting (SV): Use the 'SET' button to enter temperature adjustment mode. Use the up/down arrows to set the desired drying temperature. Press 'SET' again to confirm.
• Drying Time Setting: The dryer typically operates for a set duration or until humidity targets are met. Consult the on-screen display for current drying time.

6.2. Auto Humidity Control (Mode 2)

This mode allows the dryer to automatically manage humidity levels to prevent over-drying while ensuring optimal conditions.

• Activate Mode 2: Navigate to Mode 2 on the display.
• Set Humidity Range: In Mode 2, you can adjust the target humidity range, typically between 30% and 50%.
• Автоматты жұмыс: The S4 will automatically initiate drying when the internal relative humidity (RH) rises above your set range.
• Автоматты тоқтау: Drying will automatically cease when the internal RH drops below 25%, preserving filament quality.

Ескерту: Always refer to the specific filament manufacturer's recommendations for optimal drying temperatures and durations.

7. Техникалық қызмет көрсету

• Тазалау: Ensure the device is unplugged before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners or solvents.
• Ішкі тазалау: Periodically check the interior for any filament debris or dust. Use a soft brush or compressed air to gently remove any accumulation.
• Сақтау орны: When not in use for extended periods, store the dryer in a cool, dry place, away from direct sunlight and moisture.

8. Ақаулықтарды жою

9. Техникалық сипаттамалар

10. Кепілдік және қолдау

SUNLU products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the official SUNLU website or contact your retailer. Please have your product model (S4) and purchase information ready when contacting support.