AVAPOW A37, TJ18

AVAPOW A37 and TJ18 Jump Starter User Manual

Models: A37, TJ18

1. Кіріспе

Thank you for choosing the AVAPOW A37/TJ18 Jump Starter. This device is designed to safely and efficiently jump-start vehicles with dead 12V batteries and serve as a portable power bank for electronic devices. Please read this manual thoroughly before use to ensure proper operation and to prevent damage to the product or your vehicle.

2. Қауіпсіздік туралы ақпарат

WARNING: Improper use may result in injury or damage to the device or vehicle.

  • Әрқашан қызыл cl жалғаңызamp оң (+) терминалға және қара clamp теріс (-) терминалға.
  • Қызыл және қара cl-ге қол тигізбеңізamps together to avoid short circuits.
  • Do not jump-start a vehicle if the jump starter's battery level is below 20%.
  • Do not attempt to jump-start vehicles with voltages other than 12V.
  • Құрылғыны балалардан алыс ұстаңыз.
  • Құрылғыны жоғары температураға, тікелей күн сәулесіне немесе суға ұшыратпаңыз.
  • If the jump starter becomes excessively hot during use, discontinue operation immediately.
  • Пайдалану және зарядтау кезінде дұрыс желдетуді қамтамасыз етіңіз.

3. Пакет мазмұны

Пакетте барлық элементтердің бар екенін тексеріңіз:

  • AVAPOW Jump Starter Unit (A37 or TJ18)
  • Smart Jumper Clamps
  • USB-C зарядтау кабелі
  • Сақтау қорабы
  • Пайдаланушы нұсқаулығы (бұл құжат)
AVAPOW A37 Jump Starter with smart clamps, USB-C cable, and storage case

Image 3.1: Contents of the AVAPOW Jump Starter package, including the main unit, smart jumper clamps, USB-C charging cable, and a protective storage case.

4. Өнім аяқталдыview

Familiarize yourself with the components and features of your AVAPOW Jump Starter.

Бүйір view of AVAPOW Jump Starter showing ports and buttons

Сурет 4.1: Бүйірлік view illustrating the Force-Start Button, LED Light, EC5 Output Port, USB-C Input/Output (18W Max), USB-A Output, and DC Output.

AVAPOW Jump Starter 4-inch smart display showing power monitoring and indicators

Image 4.2: The 4-inch smart display provides real-time power monitoring. Indicators include 'IN' (Charging Detected), 'OUT' (Powering External Devices), 'READY' (Activation Start Indicator), 'Force Start Indicator', and 'Fault Detection Indicator'.

Негізгі ерекшеліктері:

  • Ең жоғары ток: Up to 4000A (A37) or 3000A (TJ18) for starting 12V vehicles.
  • Dual Starter Modes: Normal Mode for low-voltage batteries and Force Start Mode for completely dead batteries.
  • Жетілдірілген қауіпсіздік қорғанысы: 10-layer safety features including short-circuit, reverse polarity, over-current, and over-temperature protection.
  • 4-inch Digital Display: Clear LED screen showing battery level, voltage, and operational alerts.
  • Versatile Power Hub: USB-C PD 18W input/output, dual USB-A outputs, and a 12V DC output for charging various devices.
  • Ultra-Bright Emergency Light: Features Steady, Strobe, and SOS modes for various situations.

5. Орнату

Бастапқы зарядтау:

Before first use, fully charge the AVAPOW Jump Starter. It is recommended to charge the device every 3-6 months to maintain optimal battery health.

  1. Connect the provided USB-C charging cable to the USB-C input/output port on the jump starter.
  2. Connect the other end of the USB-C cable to a USB wall adapter (not included) or a car charger. For fastest charging, use a PD 18W compatible charger.
  3. The digital display will show 'IN' and the battery level will increase, indicating charging is in progress.
  4. Charging is complete when the display shows 100%. A full charge typically takes approximately 2.5 hours with an 18W PD charger.

6. Пайдалану нұсқаулары

6.1. Көлікті іске қосу

Көлікті іске қоспас бұрын, қозғалтқыштың кем дегенде 20% зарядталғанына көз жеткізіңіз.

  1. Қосылу Clamps: Plug the smart jumper clamps into the EC5 output port of the jump starter. Ensure a secure connection.
  2. Attach to Battery: Қызыл (+) cl жалғаңызamp to the positive terminal of the vehicle's battery. Connect the black (-) clamp көлік батареясының теріс терминалына.
  3. Дисплейді тексеру: The jump starter's display should show 'READY' if the connection is correct and the battery voltage is detected. If a fault is detected, the 'Fault Detection Indicator' will illuminate.
  4. Көлікті іске қосу: Start your vehicle's engine. If the vehicle does not start immediately, wait 30 seconds before trying again. Do not crank the engine for more than 3 seconds per attempt.
  5. Cl. жоюamps: Once the vehicle starts, immediately remove the smart clamps from the vehicle battery, then disconnect them from the jump starter.
AVAPOW Jump Starter connected to a car battery for jump starting

Image 6.1: The AVAPOW Jump Starter connected to a vehicle battery using the smart clamps, ready to initiate a jump start.

Күшті бастау режимі:

If your vehicle's battery is completely dead (0V) and the jump starter does not display 'READY', you may need to use Force Start Mode.

  1. Ақылды кланы қосыңызamps to the jump starter and then to the vehicle battery terminals as described above.
  2. Press and hold the 'Force-Start Button' on the jump starter for 3 seconds. The 'Force Start Indicator' will illuminate.
  3. Көлігіңіздің қозғалтқышын 30 секунд ішінде іске қосыңыз.
  4. Once the vehicle starts, immediately remove the smart clamps.

CAUTION: Use Force Start Mode only when necessary, as it bypasses some safety checks. Ensure correct polarity before activating.

6.2. Using as a Portable Power Bank

The AVAPOW Jump Starter can charge various electronic devices.

  • USB-C шығысы: Connect your device to the USB-C port using a compatible cable for fast charging up to 18W.
  • USB-A шығысы: Connect your device to either of the USB-A ports for standard charging (e.g., 5V/3A, 9V/2A, 12V/1.5A).
  • 12В тұрақты ток шығысы: Use the 12V DC output port to power 12V accessories (e.g., tire inflators, car vacuums).

6.3. Using the Emergency LED Light

The built-in LED light offers three modes for various emergency situations.

AVAPOW Jump Starter with its ultra-bright emergency LED light activated

Image 6.2: The AVAPOW Jump Starter's ultra-bright LED light, capable of Steady, Strobe, and SOS modes for emergency illumination.

  1. Press the LED light button once for Steady mode.
  2. Press again for Strobe mode.
  3. Press a third time for SOS mode.
  4. Press a fourth time to turn off the light.

7. Техникалық қызмет көрсету

  • Зарядтау: Recharge the jump starter at least once every 3-6 months to prolong battery life, even if not in use.
  • Сақтау орны: Store the device in a cool, dry place, away from direct sunlight and moisture. The recommended storage temperature is between -4°F to 140°F (-20°C to 60°C).
  • Тазалау: Құрылғының сыртын тазалау үшін жұмсақ, құрғақ шүберекті пайдаланыңыз. Қатты химиялық заттарды немесе абразивті материалдарды пайдаланбаңыз.
  • Батареяға күтім жасау: Do not disassemble the unit. The internal battery is not user-replaceable.

8. Ақаулықтарды жою

МәселеЫқтимал себебіШешім
Көлік іске қосылмайды.Jump starter battery too low; clamps not connected properly; vehicle battery completely dead.Ensure jump starter is sufficiently charged (>20%). Check clamp connections. Try Force Start Mode if battery is completely dead.
Jump starter display shows 'Fault'.Кері полярлық қосылым; қысқа тұйықталу; қызып кету.ажырату clampжәне дұрыс полярлықпен қайта қосыңыз.amps are not touching. Allow device to cool down if hot.
Стартер зарядталмай жатыр.Charging cable or adapter faulty; port obstruction.Try a different USB-C cable and wall adapter. Ensure the USB-C port is clean and free of debris.
External devices not charging.Jump starter battery too low; incorrect cable; device not compatible.Charge the jump starter. Use the correct charging cable for your device. Verify device compatibility with output specifications.

9. Техникалық сипаттамалар

  • Үлгі: A37, TJ18
  • Ағымдағы шың: Up to 4000A (A37), 3000A (TJ18)
  • Бастау томtage: 12В
  • Қозғалтқыштың үйлесімділігі: 8.0 л дейін бензин / 8.0 л дизельді қозғалтқыштар
  • USB-C кіріс/шығыс: PD 18 Вт Макс
  • USB-A шығысы 1: 5V/3A, 9V/2A, 12V/1.5A
  • USB-A шығысы 2: 5В/2.4А
  • Тұрақты ток: 12В/10А
  • Жұмыс температурасы: -4°F пен 140°F (-20°C және 60°C)
  • Зарядтау уақыты: Approximately 2.5 hours (with 18W PD charger)
  • Қауіпсіздік сертификаттары: UL/FC/CE certified

10. Кепілдік және қолдау

AVAPOW products are designed for reliability and performance. For warranty information, technical support, or any questions regarding your AVAPOW Jump Starter, please refer to the warranty card included in your package or visit the official AVAPOW website. Please have your model number (A37 or TJ18) and purchase information ready when contacting support.

© 2025 AVAPOW. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.