Longer RAY5 Mini 3.5W

Longer RAY5 Mini Laser Engraver (3.5W) Instruction Manual

Your guide to setting up, operating, and maintaining your Longer RAY5 Mini Laser Engraver.

1. Өнім аяқталдыview

The Longer RAY5 Mini is a compact and portable laser engraver and cutter designed for various materials. It features a 3.5W laser module, a 140x130mm engraving area, and multiple connectivity options for ease of use.

Longer RAY5 Mini Laser Engraver, a compact black frame laser machine on a wooden surface.

Figure 1: Longer RAY5 Mini Laser Engraver (3.5W) - Overall View

2. Қауіпсіздік туралы ақпарат

Always prioritize safety when operating the laser engraver. Failure to follow safety guidelines can result in serious injury or damage to the device.

  • Көзді қорғау: Жұмыс кезінде әрқашан берілген лазерлік қорғаныс көзілдірігін киіңіз.
  • Laser Shield: Ensure the laser shield is properly installed to reduce laser exposure.
  • Төтенше тоқтату: Familiarize yourself with the emergency stop button and its location. Press it immediately in case of any malfunction or hazard.
  • Желдету: Operate the device in a well-ventilated area to dissipate fumes and smoke generated during engraving/cutting.
  • Жанғыш материалдар: Avoid engraving or cutting highly flammable materials without proper precautions.
Four images showing safety features: an emergency stop button, limit switches, an acrylic cover, and protective glasses.

2-сурет: Бірнеше қауіпсіздік қорғанысы

3. Орнату нұсқаулығы

3.1 Қораптан шығару және бастапқы тексеру

The Longer RAY5 Mini comes pre-assembled for quick setup. Carefully remove all components from the packaging and check for any missing items or damage.

Video 1: LONGER RAY5 Mini Laser Engraver Unboxing. This video demonstrates the unboxing process and initial setup of the laser engraver.

Opened cardboard box containing a pre-assembled laser engraver frame. The device has a black frame with silver components and a green circuit board visible.

Figure 3: Pre-assembled frame and laser engraver components inside the box.

3.2 Connecting the Laser Module

  1. Carefully insert the laser module into its designated slot on the machine.
  2. Secure the laser module using the provided thumb screws.
  3. Connect all necessary cables from the laser module to the main unit, ensuring they are firmly seated.

3.3 Қуат қосылымы

  1. Plug the DC power adapter into the machine's power port.
  2. Қуат адаптерін қолайлы қуат розеткасына қосыңыз.
  3. Ensure the emergency stop button is disengaged (turned counter-clockwise) and the rocker switch is in the 'ON' position.

4. Пайдалану нұсқаулары

4.1 Бағдарламалық құралды орнату және қосу

The Longer RAY5 Mini supports various software for design and control, including LaserGRBL (free) and LightBurn (paid). It also offers Wi-Fi and APP connectivity.

  • LaserGRBL: Download and install LaserGRBL from the official website. Ensure the CH340 driver is installed for USB connection.
  • LightBurn: Download and install LightBurn. Import the device configuration file for RAY5 Mini.
  • APP/Wi-Fi: Connect your device to the engraver via Wi-Fi using the dedicated app for mobile control.

Video 2: Ray5 mini Laser GRBL Installation and Usage Guide. This video provides a step-by-step guide on installing and using LaserGRBL software.

Video 3: Ray5 mini LightBurn Installation and Usage Guide. This video demonstrates the installation and usage of LightBurn software.

Video 4: Ray5 mini tutorial by using LaserBurn APP in STA mode. This video guides users through using the LaserBurn app in STA mode.

4.2 Лазерді фокустау

Accurate focusing is crucial for optimal engraving and cutting results. Use the provided focus block to set the correct distance between the laser module and the material surface.

  1. Place the material to be engraved/cut on the working area.
  2. Position the focus block directly under the laser module.
  3. Loosen the thumb screw on the laser module.
  4. Lower the laser module until its bottom edge gently touches the top of the focus block.
  5. Tighten the thumb screw to secure the laser module in place.
  6. Remove the focus block. The laser is now focused.

4.3 Гравировка және кесу процесі

Once the laser is focused and connected to your chosen software, you can begin your projects.

  • Материалдық үйлесімділік: The RAY5 Mini can engrave over 300 types of materials, including wood, leather, metal, and acrylic.
  • Дәлдік: Achieve detailed results with a 0.04mm x 0.04mm ultra-fine laser spot and 0.01mm accuracy.
  • Жылдамдық: Engrave at speeds up to 12,000mm/min for efficient project completion.
An infographic showing the Longer RAY5 Mini Laser Engraver's features: light weight, high speed (12,000mm/min), 0.04x0.04mm laser spot size, 130x140mm working area, compatibility with LaserGRBL, LightBurn, LaserBurn, and over 300 engravable materials.

Figure 4: Key Features of the Longer RAY5 Mini

A split image comparing engraving quality: 'Ray5 mini 0.04*0.04 mm' shows finer detail on the left, while 'Others 0.15mm*0.15mm' shows coarser detail on the right.

Figure 5: Comparison of Engraving Precision

Video 5: Ray5 Mini Engraves Wood Panels with Ease & Precision. This short video demonstrates the engraver's ability to create precise designs on wood.

5. Техникалық қызмет көрсету

Regular maintenance ensures the longevity and optimal performance of your Longer RAY5 Mini.

  • Тазалау: Regularly clean the laser lens and the working area to prevent debris buildup. Use a soft, lint-free cloth and appropriate cleaning solutions.
  • Майлау: Periodically lubricate the guide rails and moving parts as recommended in the detailed manual to ensure smooth operation.
  • Кабельді тексеру: Барлық кабельдердің тозуын немесе зақымдалуын тексеріңіз. Зақымдалған кабельдерді дереу ауыстырыңыз.

6. Ақаулықтарды жою

If you encounter issues with your Longer RAY5 Mini, refer to the following common problems and solutions:

МәселеЫқтимал себебіШешім
Лазер жұмыс істемейді немесе шығысы әлсізIncorrect focus, dirty lens, low power setting, loose cable.Re-focus the laser, clean the lens, increase power setting in software, check cable connections.
Құрылғы компьютерге/қолданбаға қосылмайдыDriver not installed, incorrect COM port, Wi-Fi issues.Install CH340 driver, select correct COM port, ensure stable Wi-Fi connection.
Engraving quality is poor or inconsistentIncorrect speed/power settings, material not flat, loose X/Y axis.Adjust speed and power settings, ensure material is flat and secure, tighten eccentric nuts if axes are loose.
Машина ерекше дыбыстар шығарадыLoose components, debris in moving parts.Inspect and tighten all screws, clean guide rails, lubricate moving parts.

7. Техникалық сипаттамалар

  • Өнім өлшемдері: 11.5 x 11.26 x 6.5 дюйм
  • Элемент үлгі нөмірі: RAY5 Mini
  • Лазерлік қуат: 3.5 Вт
  • Гравюра аймағы: 140x130 мм
  • Гравюра жылдамдығы: 20 000 мм/мин дейін
  • Лазерлік нүктенің өлшемі: 0.04 мм x 0.04 мм
  • Қосылу мүмкіндігі: USB, Wi-Fi, APP
  • Қолдау көрсетілетін бағдарламалық құрал: LaserGRBL, LightBurn
  • Элемент салмағы: 5.15 фунт
  • Өндіруші: ҰЗАҚ

8. Кепілдік және қолдау

Longer provides comprehensive support for your RAY5 Mini Laser Engraver.

  • Кепілдік: Please refer to the official Longer webКепілдік туралы толық ақпарат алу үшін веб-сайтқа немесе сатып алу құжаттамасына жүгініңіз.
  • Техникалық көмек: Lifetime technical support is available. Contact Longer customer service for assistance with any issues or questions.
  • Байланыс: Қолдау үшін мына сайтқа кіріңіз Longer Official Store on Amazon or refer to the contact information in your product packaging.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.