DTAPE DT50

DTAPE Laser Measure User Manual

Model: DT50 GEN2

Brand: DTAPE

Кіріспе

This manual provides detailed instructions for the safe and efficient operation of your DTAPE Laser Measure. This device is designed for precise distance measurements, offering multiple modes for various applications.

Не кіреді

  • ACPOTEL 165 Ft Laser Measuring Device
  • 1.5V AAA Batteries
  • Портативті сөмке
  • Пайдаланушы нұсқаулығы (бұл құжат)
  • Қол бауы
  • Пакет қорабы

Орнату

Батареяны орнату

The DTAPE Laser Measure requires 1.5V AAA batteries. Locate the battery compartment on the back of the device, open it, and insert the batteries according to the polarity indicators. Close the compartment securely.

DTAPE Laser Measure with batteries, portable bag, and hand strap

Figure 1: DTAPE Laser Measure and included accessories.

Қуатты қосу/өшіру

Press and hold the power button (usually marked with a power symbol) to turn the device on or off. The backlit LCD display will illuminate upon activation.

Пайдалану нұсқаулары

Негізгі қашықтықты өлшеу

1. Point the laser aperture towards the target surface.
2. Press the measurement button (often the main central button) once to activate the laser.
3. Press the measurement button again to take a reading. The distance will be displayed on the screen.

DTAPE Laser Measure displaying distance measurement

Figure 2: The ultra-HD LCD display showing measurement results.

Бірлікті түрлендіру

To switch between measurement units (m/in/ft/ft+in), long-press the "Unit" button. The current unit will be indicated on the display.

DTAPE Laser Measure showing unit conversion options

Figure 3: Instant unit conversion between meters, feet, inches, and feet+inches.

Өлшеу анықтамалық нүктесі

The device allows you to set the measurement reference point from either the front or the back of the device. Press the reference point button (often indicated by an icon showing the device's base) to toggle between these options.

DTAPE Laser Measure showing front and back reference points

Figure 4: Switching between front and back measurement reference points.

Бірнеше өлшеу режимдері

The DTAPE Laser Measure offers 7 measurement modes. Press the mode button (often indicated by a grid or multiple squares icon) to cycle through the available functions:

  • Қашықтық: Single point-to-point measurement.
  • Аудан: Calculates the area of a surface (length x width).
  • Көлемі: Calculates the volume of a space (length x width x height).
  • Пифагор: Indirect measurement using the Pythagorean theorem (single or double).
  • Үздіксіз өлшеу: Real-time tracking of distance as the device is moved.
  • Қосу/азайту: Өлшемдерді қосу немесе азайту.
  • Деректерді сақтау: Stores historical measurement data.
DTAPE Laser Measure showing various measurement modes

Figure 5: Visual representation of various measurement modes including distance, area, volume, and Pythagorean.

Official Product Video: DT50 Laser Distance Meter

Video 1: An official product video demonstrating the features and usage of the DT50 Laser Distance Meter, including various measurement modes and applications.

Техникалық қызмет көрсету

The DTAPE Laser Measure is designed with an IP54 rating, providing protection against dust and splashing water.

  • Құрылғыны жұмсақ, құрғақ шүберекпен сүрту арқылы таза ұстаңыз.
  • Құрылғыны ұзақ уақыт шектен тыс температура немесе тікелей күн сәулесінің әсеріне ұшыратпаңыз.
  • Store the device in its portable bag when not in use to protect it from dust and impacts.
  • Құрылғының ағып кетуін болдырмау үшін ұзақ уақыт бойы пайдаланылмаса, батареяларды алып тастаңыз.

Ақаулықтарды жою

If you encounter issues with your DTAPE Laser Measure, consider the following:

  • Құрылғы қосылмаған: Батареяның орнатылуын тексеріңіз және батареялардың таусылмауын тексеріңіз. Қажет болса ауыстырыңыз.
  • Дұрыс емес көрсеткіштер: Ensure the laser aperture is clean and unobstructed. Verify the correct reference point is selected. Measure on a stable, non-reflective surface.
  • Лазер көрінбейді: In very bright conditions, the laser dot may be difficult to see. Try to shade the target area or use the device in lower light.

For persistent issues, refer to the detailed user manual included in the package or contact customer support.

Техникалық сипаттамалар

ЕрекшелікМәлімет
БрендDTAPE
ҮлгіDT50 GEN2
Дәлдік±1/16 дюйм
Өлшеу диапазоны165 фут
Жауап беру жылдамдығы0.4 секунд
Дисплей2" Ultra-HD LCD
IP рейтингіIP54 (суға және шаңға төзімді)
Қуат көзі1.5V AAA Batteries
МатериалАкрилонитрилді бутадиен стиролы
Элемент салмағы7 унция

Кепілдік және қолдау

Your DTAPE Laser Measure comes with a 24-Month Warranty, ensuring peace of mind regarding product quality and performance.

For technical support, warranty claims, or any inquiries, please contact ACPOTEL customer service. Refer to the contact information provided in your product packaging or on the official ACPOTEL webсайт.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.