ABUS AZAA10000 Terxon SX Alarm Control Panel User Manual

1. Кіріспе

This manual provides essential information for the installation, operation, and maintenance of your ABUS AZAA10000 Terxon SX Alarm Control Panel. Please read these instructions carefully before attempting to install or operate the system to ensure proper functionality and safety.

The ABUS AZAA10000 Terxon SX is a wired alarm control panel designed to provide reliable security for your premises. It integrates various security components to detect intrusions and alert users.

2. Қауіпсіздік туралы ақпарат

• Электр қауіпсіздігі: Installation and wiring should only be performed by qualified personnel. Disconnect power before servicing the unit.
• Батареяны өңдеу: The system uses a lead-acid battery. Handle with care. Do not short-circuit, puncture, or expose to extreme temperatures. Dispose of batteries according to local regulations.
• Қоршаған орта жағдайлары: Install the control panel in a dry, protected area, away from direct sunlight, extreme temperatures, and high humidity.
• Рұқсат етілген пайдалану: Use the system only for its intended purpose as an alarm control panel.

3. Пакет мазмұны

Барлық компоненттер пакетте бар екеніне көз жеткізіңіз:

• ABUS AZAA10000 Terxon SX дабыл басқару тақтасы
• Keypad (LCD control panel)
• Installation hardware (screws, anchors)
• Пайдаланушы нұсқаулығы (бұл құжат)
• Қуат кабелі/адаптері
• Lead-acid battery (may be pre-installed or separate)

4. Өнім аяқталдыview

The ABUS AZAA10000 Terxon SX system consists of a main control panel unit and a separate LCD keypad for user interaction.

1-сурет: ABUS AZAA10000 Terxon SX Alarm Control Panel (right) and LCD Keypad (left). The control panel houses the main electronics and battery, while the keypad provides the interface for arming, disarming, and system configuration.

2-сурет: Басқа view of the ABUS AZAA10000 Terxon SX Alarm Control Panel and LCD Keypad, highlighting the compact design of the keypad for discreet placement.

4.1 Басқару тақтасы

The main control panel unit is the central processing unit of the alarm system. It manages all connected sensors, communicates with the keypad, and triggers alarms. It typically includes terminals for wired connections, a power input, and a compartment for the backup battery.

4.2 LCD пернетақтасы

The LCD keypad serves as the primary user interface. It features a display for status messages, a numeric keypad for entering codes, and function buttons for arming, disarming, and accessing system menus. Compatible devices include the LCD control panel, relay board, and optional plug-in relay module.

5. Орнату және орнату

Proper setup and installation are crucial for the reliable operation of your alarm system. It is recommended that installation be performed by a certified security technician.

5.1 Басқару тақтасын орнату

1. Орынды таңдаңыз: Choose a secure, discreet, and centrally located area, preferably indoors, away from extreme temperatures and moisture. Ensure it is accessible for maintenance but not easily tampбірге жүргізілді.
2. Қауіпсіз орнату: Use appropriate screws and anchors (type: screw-in) to firmly attach the control panel to a wall. Ensure the mounting surface can support the unit's weight (2.8 kg).

5.2 Пернетақтаны орнату

1. Орынды таңдаңыз: Install the keypad near the main entry/exit point of the protected area, at a convenient height for all users.
2. Қауіпсіз орнату: Mount the keypad securely to the wall using the provided hardware.

5.3 Сымды қосылымдар

The ABUS AZAA10000 Terxon SX is a wired system. All connections (sensors, sirens, power, keypad) must be made using appropriate wiring. Refer to the detailed wiring diagrams provided in the separate installation guide for specific terminal connections.

• Қуат қосылымы: Connect the control panel to a 230 Volt AC power source.
• Батарея қосылымы: Connect the lead-acid backup battery to the designated terminals inside the control panel.
• Пернетақта қосылымы: Connect the keypad to the control panel using the specified wired connection.
• Сенсор қосылымдары: Connect all wired sensors (e.g., motion detectors, door/window contacts) to the appropriate zone inputs on the control panel.
• Siren/Strobe Connections: Connect external sirens and strobe lights to the alarm outputs.

5.4 Бастапқы қуаттандыру және конфигурациялау

1. Қуатты қолдану: Once all wiring is complete and checked, connect the main power supply.
2. Жүйені инициализациялау: The system will perform a self-test. Follow the on-screen prompts on the keypad.
3. Program Master Code: Set a unique master user code. This code is essential for system programming and advanced functions.
4. Zone Programming: Configure each connected sensor zone according to its type (e.g., entry/exit, interior, 24-hour).
5. Пайдаланушы кодтары: Create additional user codes for family members or authorized personnel.

6. Пайдалану нұсқаулары

This section covers the basic daily operation of your ABUS AZAA10000 Terxon SX Alarm Control Panel.

6.1 Жүйені қаруландыру

• Full Arming (Away Mode): Ensures all zones are active. Enter your user code and press the "Arm" button (or equivalent). The system will provide an exit delay.
• Partial Arming (Stay Mode): Activates perimeter zones while allowing movement within interior zones. Enter your user code and press the "Stay" or "Partial Arm" button.

6.2 Жүйені қарусыздандыру

To disarm the system, enter your user code when prompted (e.g., upon entry during the entry delay) or press the "Disarm" button (or equivalent) and then enter your code.

6.3 Alarm Events

When an alarm is triggered, the system will activate sirens (audio) and potentially strobe lights (visual). The keypad display will indicate the triggered zone. To silence the alarm, disarm the system using your user code.

6.4 Жүйе күйі

The LCD keypad displays the current system status, including armed/disarmed state, open zones, and any system faults (e.g., low battery, communication errors).

7. Техникалық қызмет көрсету

Regular maintenance ensures the longevity and reliability of your alarm system.

• Батареяны тексеру: The lead-acid backup battery should be checked periodically (e.g., annually) and replaced every 3-5 years, or when the system indicates a low battery fault.
• Тазалау: Gently wipe the keypad and control panel housing with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Сенсорды тексеру: Periodically test all connected sensors (e.g., motion detectors, door/window contacts) to ensure they are functioning correctly.
• Бағдарламалық құрал жаңартулары: While specific software update information is not available, it is good practice to consult with your installer or ABUS support for any recommended firmware updates.

8. Ақаулықтарды жою

This section addresses common issues you might encounter with your ABUS AZAA10000 Terxon SX Alarm Control Panel.

For issues not listed here or if troubleshooting steps do not resolve the problem, please contact ABUS technical support or your certified installer.

9. Техникалық сипаттамалар

10. Кепілдік және қолдау

ABUS provides a warranty period of at least 2 жыл after purchase for this product, ensuring proper functionality and protection against defects.

Қосалқы бөлшектердің болуына кепілдік беріледі 1 жыл.

For technical assistance, warranty claims, or further information, please contact your authorized ABUS dealer or visit the official ABUS webқолдау ресурстарына арналған сайт.