Vtopek H11 Solar TPMS: 3.5-inch Wireless Tire Pressure Monitoring System User Manual

1. Кіріспе

This manual provides detailed instructions for the installation, operation, and maintenance of your Vtopek H11 Solar Tire Pressure Monitoring System (TPMS). This system is designed to monitor tire pressure and temperature in real-time, enhancing driving safety for both 2-wheel (trailer) and 4-wheel (car, SUV, van) vehicles.

2. Пакет мазмұны

Төменде тізімделген заттардың барлығы пакетіңізге қосылғанын тексеріңіз:

• TPMS Monitor x 1
• External Sensors x 4
• Removable Bracket x 1
• Hex Nuts x 4
• Кілт х 1
• C типті зарядтау кабелі x 1
• Стикерлер x 2
• Пайдаланушы нұсқаулығы x 1

2.1-сурет: Бума мазмұны

3. Негізгі мүмкіндіктер

• Қос режимді қолдау: Compatible with both 2-wheel (trailer) and 4-wheel (car, SUV, van) vehicles.
• High Precision Monitoring: Provides tire pressure readings with 0.01 bar accuracy.
• Separate Alarm Settings: Allows independent high/low pressure alarm value settings for front and rear tires.
• Detachable Monitor: The monitor can be easily detached from its bracket for flexible placement, charging, and settings adjustment.
• Автоматты артқы жарық: 3-level adjustable backlight for clear visibility in various lighting conditions (daytime, indoor, night).
• Нақты уақыттағы дабылдар: Six alarm modes including rapid air leak, high/low pressure, high temperature, sensor data loss, and low battery.
• Автоматты ұйқы/ояту: Features vibration detection for automatic power on/off, conserving battery.
• Қосарлы зарядтау опциялары: Supports solar charging and USB Type-C charging.
• Durable External Sensors: IP68 waterproof, anti-dust, anti-theft, and suitable for a pressure range of 0.2 to 6.0 bar.

4. Орнату және орнату

4.1 Мониторды орнату

The monitor can be installed on the windshield or dashboard. The detachable bracket allows for flexible positioning and easy removal for charging or adjustments.

1. Attach the removable bracket to the desired location on your windshield or dashboard using the adhesive provided. Ensure the surface is clean and dry.
2. Slide the TPMS monitor onto the bracket. The angle can be adjusted for optimal viewing.
3. Ensure the monitor does not obstruct your view жүргізу кезінде.

Figure 4.1: Monitor Installation and Detachable Bracket

4.2 Сенсорды орнату

Install the external sensors on your vehicle's tire valves. Each sensor is labeled (FL, FR, RL, RR) for its corresponding tire (Front Left, Front Right, Rear Left, Rear Right).

1. Remove the original valve cap from the tire valve.
2. Screw on a hex nut onto the tire valve.
3. Screw the corresponding sensor (e.g., FL for Front Left) onto the tire valve until it is hand-tight.
4. Tighten the hex nut against the sensor using the provided wrench to secure it and prevent theft.
5. Repeat for all four tires.

4.2-сурет: Сыртқы сенсорды орнату қадамдары

Ескерту: The sensors are pre-paired with the monitor. If a sensor is replaced, it may need to be re-paired. Refer to the troubleshooting section for pairing instructions.

5. Пайдалану нұсқаулары

5.1 Powering On/Off and Automatic Functions

• Бастапқы қуат қосулы: Press and hold the left button on the monitor for more than 3 seconds to turn it on.
• Автоматты ояту: The TPMS monitor will automatically turn on when it detects vehicle vibration (e.g., opening a car door, starting the engine).
• Автоматты ұйқы режимі: If no vibration is detected for 5 minutes after parking, the monitor will automatically enter sleep mode to conserve power.

Figure 5.1: Automatic Sleep and Vibration Detection

5.2 Display and Alarm Modes

The 3.5-inch large screen displays real-time tire pressure and temperature for all four tires simultaneously. The system features six alarm modes:

• Rapid Air Leak Alarm: Alerts to sudden and significant pressure drops.
• Жоғары қысым дабылы: Activates if tire pressure exceeds the set high limit.
• Төмен қысым дабылы: Activates if tire pressure falls below the set low limit.
• Жоғары температура дабылы: Warns if tire temperature exceeds the set limit.
• Sensor Data Loss Alarm: Indicates a sensor is not transmitting data.
• Төмен батарея дабылы: Alerts when the monitor or sensor battery is low.

Figure 5.2: Real-time Monitoring and Alarm Modes

5.3 Mode Switching (2-Wheel / 4-Wheel)

The system supports switching between 2-wheel mode (for trailers) and 4-wheel mode (for cars). This allows for accurate monitoring without unnecessary alarms when fewer sensors are active.

• To switch modes, access the system settings (refer to the full manual for specific button sequences).
• Select "2-Wheel Mode" if using only two sensors (e.g., for a trailer).
• Select "4-Wheel Mode" for standard car applications with four sensors.

Figure 5.3: 2-Wheel / 4-Wheel Mode Switching

5.4 Setting Alarm Values

This TPMS allows for separate high and low pressure alarm settings for front and rear tires, providing more precise monitoring tailored to your vehicle's requirements.

1. Enter the settings menu on the monitor.
2. Navigate to the alarm value adjustment section.
3. Set the desired high pressure alarm value for the front tires (e.g., 3.45 bar).
4. Set the desired low pressure alarm value for the front tires (e.g., 1.95 bar).
5. Repeat the process for the rear tires, setting their specific high and low pressure alarm values (e.g., 5.85 bar high, 2.55 bar low).
6. Мәзірден шықпас бұрын параметрлерді сақтаңыз.

Figure 5.4: Separate Front and Rear Wheel Alarm Settings

6. Техникалық қызмет көрсету

6.1 Monitor Charging

The monitor supports two charging methods:

• Күннен зарядтау: The integrated solar panel charges the monitor when exposed to sunlight. Ensure the monitor is placed in a location with adequate sun exposure.
• USB Type-C зарядтау: For cloudy days or when solar charging is insufficient, use the provided USB Type-C cable to charge the monitor via a car charger or other USB power source.

Маңызды: Charge the monitor for more than 3 hours before its first use. When fully charged, a long press of the left button will turn it on.

Figure 6.1: Solar and USB Type-C Charging

6.2 Sensor Battery Replacement

The external sensors use replaceable CR1632 lithium-polymer batteries. When a low battery alarm for a sensor is triggered, replace its battery.

1. Unscrew the sensor from the tire valve.
2. Сенсорды абайлап ашыңызasing.
3. Ескі CR1632 батареясын шығарып алыңыз.
4. Дұрыс полярлықты қамтамасыз етіп, жаңа CR1632 батареясын салыңыз.
5. c сенсорын жабыңызasing and re-install it on the tire valve, following the installation steps in Section 4.2.

7. Ақаулықтарды жою

8. Техникалық сипаттамалар

9. Кепілдік және қолдау

Vtopek provides a 1 жылдық кепілдік for this TPMS product. For technical support, warranty claims, or any inquiries, please contact our customer service.

• Кепілдік мерзімі: Сатып алған күннен бастап 1 жыл.
• Байланыс: Refer to the contact information provided with your product packaging or on the official Vtopek webсайт.

9.1-сурет: Кепілдік және қолдау туралы ақпарат