DEUSES 2105-1107010-20

DEUSES Carburetor Instruction Manual

For Lada 2101-2107, Lada Niva 1200ccm/1300ccm (OEM 2105-1107010-20)

1. Кіріспе

This instruction manual provides essential information for the proper installation, operation, and maintenance of your new DEUSES Carburetor. To ensure optimal performance and longevity, please read this manual thoroughly before attempting any installation or adjustment. This carburetor is designed as a replacement part for specific Lada models.

2. Өнім аяқталдыview

The DEUSES Carburetor (OEM 2105-1107010-20) is a high-performance engine component engineered for reliable fuel delivery. It features robust metal construction designed for durability and consistent operation. This unit is intended to directly replace the original equipment carburetor, aiming to restore or improve engine performance.

Негізгі ерекшеліктері:

  • Төзімділік үшін жоғары сапалы құрылыс.
  • Designed for direct replacement of original equipment.
  • Aids in maintaining fuel efficiency while enhancing power output.
  • Сенімді және оңай орнату.
DEUSES Carburetor, top-down view

1 сурет: жоғарыдан төменге view of the DEUSES Carburetor, showing the air intake and primary/secondary barrels.

3. Үйлесімділік

This carburetor is compatible with the following vehicle models and engine displacements. It is crucial to verify the OEM part number (2105-1107010-20) against your existing carburetor to ensure correct fitment.

  • Lada 1200ccm
  • Lada 1300ccm
  • Lada Niva Base Sport Utility 2-Door 1.6L (1590CC, 97Cu. In. l4 GAS Naturally Aspirated) for model years 1988-1992.
  • Lada 2101-2107 series.

Маңызды: Always cross-reference the part number 2105-1107010-20 with your vehicle's original equipment to confirm compatibility before installation.

DEUSES Carburetor, angled front view

Сурет 2: Бұрыштық алдыңғы view of the DEUSES Carburetor, showing various linkages and fuel inlet.

4. Орнату

Installation of a carburetor requires mechanical knowledge and appropriate tools. If you are not confident in your ability to perform this procedure, it is recommended to seek assistance from a qualified mechanic.

Жалпы орнату қадамдары:

  1. Ең алдымен қауіпсіздік: Көліктің аккумуляторын ажыратыңыз. Қозғалтқыштың салқын екеніне көз жеткізіңіз.
  2. Жанармай төгу: Relieve fuel pressure and drain any fuel from the fuel lines to prevent spills.
  3. Remove Air Cleaner: Detach the air cleaner assembly from the old carburetor.
  4. Байланыстар мен шлангілерді ажыратыңыз: Carefully disconnect all fuel lines, vacuum hoses, and throttle/choke linkages from the old carburetor. Label them if necessary for reassembly.
  5. Ескі карбюраторды алып тастаңыз: Unbolt the old carburetor from the intake manifold. Remove the old gasket.
  6. Prepare for New Carburetor: Clean the intake manifold surface thoroughly. Place a new carburetor gasket onto the manifold.
  7. Жаңа карбюраторды орнату: Carefully place the new DEUSES Carburetor onto the gasket and secure it with the mounting bolts. Tighten bolts evenly to prevent warping.
  8. Құрамдастарды қайта қосу: Reattach all fuel lines, vacuum hoses, and throttle/choke linkages to the new carburetor. Ensure all connections are secure and free of leaks.
  9. Ауа тазартқышты орнату: Ауа тазалағыш жинағын қайта орнатыңыз.
  10. Батареяны қайта қосу: Көліктің аккумуляторын қайта қосыңыз.
  11. Бастапқы іске қосу және реттеу: Start the engine and check for fuel leaks. Allow the engine to reach operating temperature. Perform initial idle speed and mixture adjustments as required for your specific vehicle model.
DEUSES Carburetor, side view with fuel inlet

Сурет 3: Бүйірлік view of the DEUSES Carburetor, highlighting the fuel inlet and various adjustment screws.

5. Операция

Once installed and properly adjusted, the carburetor will regulate the air-fuel mixture supplied to the engine. Proper operation relies on correct initial setup and regular maintenance.

Негізгі операциялық аспектілер:

  • Суық басталу: Utilize the choke mechanism (if applicable) for easier starting in cold weather.
  • Қыздыру: Allow the engine to warm up to operating temperature before driving to ensure stable idle and optimal performance.
  • Дроссель реакциясы: The carburetor should provide smooth and responsive acceleration.
  • Idle Stability: A properly adjusted carburetor will maintain a consistent engine idle speed.
DEUSES Carburetor, rear view

4-сурет: артқы view of the DEUSES Carburetor, showing the throttle linkage and mounting points.

6. Техникалық қызмет көрсету

Regular maintenance is crucial for the longevity and efficient operation of your carburetor. Adhere to your vehicle's manufacturer recommendations for service intervals.

Техникалық қызмет көрсету бойынша кеңестер:

  • Ауа сүзгісі: Regularly inspect and replace the air filter to prevent dirt and debris from entering the carburetor.
  • Жанармай сүзгісі: Ensure the fuel filter is clean and functioning correctly to prevent contaminants from reaching the carburetor.
  • Байланыс майлауы: Periodically lubricate throttle and choke linkages to ensure smooth operation.
  • Көрнекі тексеру: Check for any loose connections, cracked hoses, or fuel leaks around the carburetor.
  • Тазалау: If performance issues arise, a professional carburetor cleaning may be necessary. Avoid using harsh chemicals that could damage seals or components.
DEUSES Carburetor, front view

5-сурет: Алдыңғы view of the DEUSES Carburetor, showing the main body and various ports.

7. Ақаулықтарды жою

This section addresses common issues that may arise with carburetor operation. For complex problems, consult a qualified automotive technician.

Жалпы мәселелер мен шешімдер:

  • Қозғалтқыш иінді, бірақ іске қосылмайды:
    • Карбюраторға отын беруді тексеріңіз.
    • Verify choke operation.
    • Вакуумдық ағып кетулерді тексеріңіз.
  • Rough Idle or Stalling:
    • Бос жүріс жылдамдығын және араластыру бұрандаларын реттеңіз.
    • Check for vacuum leaks.
    • Ensure fuel filter is clean.
  • Нашар үдеу немесе күмән:
    • Inspect accelerator pump operation.
    • Check for clogged fuel passages.
    • Verify proper choke disengagement.
  • Шамадан тыс отын шығыны:
    • Check float level adjustment.
    • Ensure mixture screws are correctly set.
    • Жанармай ағып кетуін тексеріңіз.
DEUSES Carburetor, bottom view

6-сурет: төменгі view of the DEUSES Carburetor, showing the base plate and mounting holes.

8. Техникалық сипаттамалар

АтрибутМәлімет
ӨндірушіDEUSES
OEM бөлік нөмірі2105-1107010-20
Compatible Engine Displacements1200ccm, 1300ccm, 1.6L (1590CC)
Үйлесімді көлік үлгілеріLada 2101-2107, Lada Niva (1988-1992)
Элемент салмағы0.035 ounces (Note: This weight seems unusually low for a carburetor and may be a data entry error. Please refer to actual product for accurate weight.)
ASINB0CFTHSPG3

9. Кепілдік және қолдау

For warranty information or technical support, please refer to the documentation provided with your purchase or contact the DEUSES customer service department. Keep your purchase receipt as proof of purchase.

For further assistance, please visit the DEUSES official webсайтына кіріңіз немесе уәкілетті дилеріңізге хабарласыңыз.

© 2023 DEUSES. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.