Кіріспе
This manual provides detailed instructions for the installation, operation, and maintenance of your ELING 6-Gauge Set. This set includes a GPS Speedometer, Tachometer, Fuel Level Gauge, Water Temperature Gauge, Oil Pressure Gauge, and Voltmeter. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.
Өнім ерекшеліктері
- Кешенді жиынтық: Includes GPS Speedometer, Tachometer, Fuel Level, Water Temperature, Oil Pressure, and Voltmeter.
- Әмбебап қолданба: Suitable for various vehicles, boats, and off-road applications.
- Жоғары дәлдік: Utilizes satellite signal reception for accurate speed measurement and stepper motors for precise gauge readings.
- Тұрақты дизайн: IP67 waterproof and dustproof rating ensures reliability in harsh environments.
- Қызыл артқы жарық: Provides clear visibility in all lighting conditions.
- Тиімді жұмыс: Stepper motors offer low power consumption and extended lifespan.
Орнату және орнату
Proper installation is crucial for the accurate operation of your gauge set. Follow these steps carefully.
1. Gauge Installation
The set includes gauges of two different sizes: 85mm and 52mm.
For 85mm Gauges (GPS Speedometer, Tachometer)
- Cut an 85mm (3-3/8 inch) diameter hole in your dashboard or panel.
- Ensure there is at least 70mm (2-3/4 inch) of clearance behind the panel for the gauge body.
- Insert the gauge into the prepared hole.
- Secure the gauge using the provided M4 nut and C-type bracket to seal it firmly in place.
For 52mm Gauges (Fuel Level, Water Temp, Oil Pressure, Voltmeter)
- Cut a 52mm (2-1/16 inch) diameter hole in your dashboard or panel.
- Ensure there is at least 70mm (2-3/4 inch) of clearance behind the panel for the gauge body.
- Insert the gauge into the prepared hole.
- Secure the gauge using the provided M4 nut and C-type bracket to seal it firmly in place.

Image: This diagram illustrates the required cutout dimensions (85mm and 52mm) and the necessary 70mm clearance behind the panel for gauge installation.

Image: A page from the owner's manual detailing the installation process for the 85mm gauges, including cutting the hole, inserting the gauge, and securing it with the M4 nut and C-bracket. It also shows a wiring diagram.

Image: A page from the owner's manual detailing the installation process for the 52mm gauges, including cutting the hole, inserting the gauge, and securing it with the M4 nut and C-bracket. It also shows a wiring diagram.
2. GPS антеннасын орнату
- Fix the GPS antenna securely in a flat position. The black side of the antenna must face upwards.
- For optimal signal reception, place the antenna outside the vehicle or boat, or inside the front windshield, ensuring it has a clear view аспанның.
- Connect the antenna cable to the designated socket on the rear of the GPS speedometer.
- Маңызды: Do not cut or modify the antenna cable.
3. Сымдарды қосу
Refer to the wiring diagrams provided in the owner's manual images (PT04 and PT05) for specific connections. General wiring instructions are as follows:
- Қызыл сым: Connect to +9-32VDC power supply.
- Қара сым: Signal Input (typically for tachometer pulse signal).
- Қызғылт сары сым: Connect to Backlight (+).
- Көк сым: Connect to Ground (-).
Note: Some gauges, such as the voltmeter or hour meter, may not include a black signal input wire.
Пайдалану нұсқаулары
1. Бастапқы қосу
After completing the wiring, turn on the power supply. The gauges will perform a self-test. The GPS speedometer will search for satellite signals. Once a signal is acquired, it will display the current speed and total mileage.
2. GPS Speedometer Functions
- Жылдамдықты көрсету: Shows current speed in MPH (0-160 MPH range).
- Одометр: Displays total accumulated mileage (0-999999 miles). This is a total odometer and cannot be reset.
- COG (Course Over Ground): Indicates the direction of travel relative to true north.
- SOG (Speed Over Ground): Displays the current speed derived from GPS.
3. Tachometer Functions
- RPM дисплейі: Shows current engine revolutions per minute (0-8000 RPM range).
- Сағат өлшегіш: Displays total accumulated engine operating hours. This hour meter cannot be reset.
- Speed Ratio Adjustment: The tachometer's speed ratio is adjustable from 1 to 300 to match various engine types. Refer to the specific instructions included with your tachometer for adjustment procedures.
4. Other Gauges
- Fuel Level Gauge: Displays fuel tank liquid level (E-1/2-F range) based on a 0-190ohm signal.
- Water Temperature Gauge: Displays water tank temperature (40-120 °C range) based on a 287.4-22.4 ohm signal.
- Oil Pressure Gauge: Displays oil pressure value (0-10 Bar / 0-145 Psi range) based on a 10-184ohm signal.
- Вольтметр: Жүйе томын көрсетедіtage (8-16V range).
Техникалық қызмет көрсету
To ensure optimal performance and longevity of your ELING 6-Gauge Set, follow these general maintenance guidelines:
- Тазалау: Жұмсақ пайдаланыңыз, damp cloth to clean the gauge faces. Avoid abrasive cleaners or solvents that could damage the display or housing.
- Қосылымды тексеру: Periodically inspect all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to inaccurate readings or intermittent operation.
- Қоршаған ортаны қорғау: While the gauges are IP67 rated for water and dust resistance, avoid prolonged exposure to extreme temperatures or direct high-pressure water jets.
Ақаулықтарды жою
If you encounter issues with your gauge set, refer to the following common problems and solutions:
- Дисплей/қуат жоқ:
- Check power connections (Red wire to +VDC, Blue wire to Ground).
- Қуат көзінің дұрыс көлем беретінін тексеріңізtage (9-32VDC).
- Check for blown fuses in the power circuit.
- GPS Speedometer Displays "Err" or No Signal:
- Ensure the GPS antenna is securely connected to the speedometer.
- Verify the GPS antenna is placed in a location with a clear, unobstructed view аспанның.
- Allow sufficient time (up to 300 seconds) for the GPS module to acquire satellite signals upon initial power-on or after relocation.
- Inaccurate Gauge Readings (Fuel, Water Temp, Oil Pressure):
- Check the signal wire connections from the respective sensors to the gauges.
- Ensure the sensors themselves are functioning correctly and are compatible with the gauge's signal range (e.g., 0-190ohm for fuel, 287.4-22.4 ohm for water temp, 10-184ohm for oil pressure).
- Tachometer Not Reading/Inaccurate RPM:
- Verify the black signal input wire is correctly connected to the engine's RPM signal source.
- Check the tachometer's speed ratio setting to ensure it matches your engine's specifications.
Техникалық сипаттамалар
| Ерекшелік | Техникалық сипаттама |
|---|---|
| Өндіруші | ЭЛИНГ |
| Үлгі анықтамасы | EL00180054 |
| Өнім өлшемдері | 26 x 17 x 10 см |
| Өнімнің салмағы | 1 келі |
| Материал түрі | Пластмасса |
| Операциялық томtage | 12 VDC (9-32VDC operating range) |
| Артқы жарық түсі | Қызыл |
| Су өткізбейтін/шаң өткізбейтін рейтинг | IP67 |
| GPS Speedometer Range | 0-160 миль/сағ |
| Odometer Range | 0-999999 миль |
| Тахометр диапазоны | 0-8000 XNUMX айналым/мин |
| Tachometer Speed Ratio | 1-300 (реттелетін) |
| Fuel Level Gauge Signal | 0-190 Ом |
| Water Temperature Gauge Range | 40-120 °C |
| Water Temperature Gauge Signal | 287.4-22.4 Ом |
| Oil Pressure Gauge Range | 0-10 Bar / 0-145 Psi |
| Oil Pressure Gauge Signal | 10-184 Ом |
| Вольтметр диапазоны | 8-16 В |
| Жұмыс режимі | LCD display, Stepper motor |
Кепілдік және қолдау
ELING products are designed for durability and performance. For specific warranty information, please refer to the documentation included with your purchase or contact ELING customer support directly. Installation instructions are provided within the product packaging.
For further assistance or technical support, please visit the official ELING webсайтына немесе сатушыға хабарласыңыз.