Jambo KL-217

Jambo 16-inch Liquid Motion Lamp (Model KL-217) User Manual

Үлгі: KL-217

Кіріспе

Thank you for choosing the Jambo 16-inch Liquid Motion Lamp. This manual provides essential information for the safe and proper use, setup, operation, and maintenance of your lamp. Қолданар алдында оны мұқият оқып шығыңыз және болашақта анықтама үшін сақтап қойыңыз.

Jambo 16-inch Liquid Motion Lamp with blue base and cap, purple liquid, and orange wax.
Jambo 16-inch Liquid Motion Lamp with blue base and cap, purple liquid, and orange wax.

The Jambo Liquid Motion Lamp creates a mesmerizing visual display as heated wax slowly rises and falls within a liquid-filled glass vessel. This dynamic effect provides a calming and decorative ambiance for any indoor space.

Қауіпсіздік туралы ақпарат

Қауіпсіз жұмысты қамтамасыз ету және зақымдануды болдырмау үшін келесі қауіпсіздік шараларын орындаңыз:

  • Тек үй ішінде пайдалану: Бұл лamp is designed for indoor use in dry locations. Do not use it outdoors or in wet environments.
  • Электр қауіпсіздігі: l екеніне көз жеткізіңізamp is connected to a 120-volt power outlet. Do not overload electrical outlets.
  • Жылу туралы ескерту: Лamp and its contents become hot during operation. Do not touch the glass or base while the lamp is on or immediately after turning it off. Allow sufficient time for cooling.
  • Тұрақты орналастыру: l қойыңызamp on a flat, stable, and heat-resistant surface away from edges where it could be easily knocked over.
  • Avoid Shaking: Do not shake, drop, or move the lamp while it is operating or hot, as this can damage the internal components and cause the liquid to become cloudy.
  • Балалар мен үй жануарларынан аулақ ұстаңыз: Due to the heat generated, keep the lamp балалар мен үй жануарларының қолы жетпейтін жерде.
  • Желдету: Ensure adequate air circulation around the lamp to prevent overheating. Do not cover the lamp.
  • Зақымдалған сым: Қуат сымы зақымдалған болса, қауіптерді болдырмау үшін оны өндіруші немесе білікті қызмет көрсету агенті ауыстыруы керек.

Пакет мазмұны

Орамнан шығарған кезде барлық компоненттердің бар екенін тексеріңіз:

  • 1 x Jambo Liquid Motion Lamp Unit (Base, Glass Vessel, Cap)
  • 1 x 30-Watt Incandescent Bulb (E17 base)
Diagram showing the components of the Jambo Liquid Motion Lamp: liquid lamp, 30-watt bulb, standard plug, high-quality durable glass, and sleek blue base and cap.
Components of the Jambo Liquid Motion Lamp, including the glass vessel, base, cap, and bulb.

Орнату

Follow these steps to set up your Jambo Liquid Motion Lamp:

  1. Қаптамадан шығару: Қаптамадан барлық компоненттерді мұқият алып тастаңыз.
  2. Шамды орнату: If the bulb is not pre-installed, gently screw the included 30-watt E17 incandescent bulb into the socket located in the lamp base. Do not overtighten.
  3. Place Glass Vessel: Carefully place the glass vessel onto the lamp base, ensuring it sits securely.
  4. Attach Cap: Place the decorative cap onto the top of the glass vessel.
  5. Позиция Lamp: Жиналған lamp on a flat, stable, and heat-resistant surface, away from direct sunlight, extreme temperatures, or drafts.
  6. Қуатты қосу: Қуат сымын стандартты 120 вольттық электр розеткасына қосыңыз.
Image illustrating the simplicity of setting up the Jambo Liquid Motion Lamp, emphasizing 'Ready to Use' by just plugging it in.
The Jambo Liquid Motion Lamp is ready for use after simple assembly and plugging into a power source.

Пайдалану нұсқаулары

Operating your Jambo Liquid Motion Lamp анық:

  1. Қосу: Locate the rotary switch on the power cord or base (depending on model) and turn it to the 'ON' position. The bulb will illuminate.
  2. Жылыту уақыты: For the first use, or after extended periods of inactivity, the lamp may take 2-4 hours to fully warm up and for the wax to begin flowing smoothly. This is normal.
  3. Wax Movement: Once warmed, the wax will begin to soften, rise, and fall in captivating patterns. The lamp operates best at room temperature (20-25°C / 68-77°F).
  4. Жұмыс ұзақтығы: For optimal performance and longevity, it is recommended to operate the lamp for no more than 8-10 hours at a time. Allow it to cool down completely before restarting.
  5. Өшіру: l өшіру үшінamp, rotate the switch to the 'OFF' position and unplug it from the power outlet when not in use for extended periods.
The Jambo Liquid Motion Lamp illuminated in a bedroom setting, casting a soft glow.
The Jambo Liquid Motion Lamp creating a calming ambiance in a room.
The Jambo Liquid Motion Lamp displayed on a side table in a modern living room, adding a decorative accent.
The Jambo Liquid Motion Lamp as a decorative accent in a modern living space.

Техникалық қызмет көрсету

Proper care will ensure the longevity and performance of your lamp:

  • Тазалау: l екеніне көз жеткізіңізamp is unplugged and completely cool before cleaning. Wipe the exterior of the glass and base with a soft, damp cloth. Do not use abrasive cleaners or immerse any part of the lamp суда.
  • Шамды ауыстыру: If the bulb burns out, unplug the lamp and allow it to cool. Carefully remove the old bulb and replace it with a new 30-watt, E17 base incandescent bulb. Ensure the replacement bulb matches the original specifications.
  • Сақтау орны: l сақталсаamp for an extended period, ensure it is clean, dry, and stored upright in a cool, dark place.
  • Ашпаңыз: Never attempt to open the sealed glass vessel or tamper with its contents. This will void any warranty and can be dangerous.

Ақаулықтарды жою

If you encounter issues with your Jambo Liquid Motion Lamp, келесі жалпы мәселелер мен шешімдерді қараңыз:

МәселеЫқтимал себебіШешім
Lamp қосылмайды.No power, faulty bulb, or loose connection.l екенін тексеріңізamp is properly plugged in. Ensure the power outlet is functional. Verify the rotary switch is in the 'ON' position. Replace the bulb if it is burnt out.
Wax is not moving or moving slowly.Insufficient warm-up time, cold room temperature, or incorrect bulb wattage.Allow 2-4 hours for the lamp to fully warm up. Ensure the room temperature is between 20-25°C (68-77°F). Confirm the bulb is a 30-watt E17 incandescent type.
Liquid is cloudy.Initial cloudiness, lamp shaken, or improper storage.Initial cloudiness often clears after several hours of continuous operation. Avoid shaking or dropping the lamp. If cloudiness persists after multiple uses, contact customer support.
Wax is stuck at the top or bottom.Not fully warmed up, lamp tilted, or excessive heat/cold.l екеніне көз жеткізіңізamp has had sufficient warm-up time. Verify the lamp is placed on a level surface. Avoid placing the lamp near heat sources or in very cold areas.

Техникалық сипаттамалар

Key technical specifications for the Jambo 16-inch Liquid Motion Lamp (Model KL-217):

ЕрекшелікМәлімет
Үлгі нөміріКЛ-217
Өлшемдер (D x W x H)11.4 см x 11.4 см x 39.4 см (шамамен 4.5 x 4.5 x 15.5 дюйм)
Көлеңке биіктігі16 дюйм
Қуат көзіСымды электр
Тtage120 вольт
Ватtage30 Вт
Шам түріҚыздыру
Шам негізіE17
Ауыстыру түріАйналмалы
Негізгі материалАлюминий
Көлеңке материалыШыны
Аяқтау түріМеталл
Ішкі/сыртқы пайдалануІшкі
Суға төзімділік деңгейіСу өткізбейтін
UPC850019692297

Кепілдік және қолдау

Jambo is committed to providing high-quality products. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.

For technical support, troubleshooting assistance beyond what is covered in this manual, or inquiries regarding parts and service, please contact Jambo customer support through the retailer where you purchased the product or visit the official Jambo webбайланыс ақпаратына арналған сайт.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.