Strymon Lex Rotary Speaker Simulator Pedal V2 Instruction Manual

1. Кіріспе

The Strymon Lex Rotary Speaker Simulator Pedal V2 is designed to provide an authentic rotary speaker experience for guitarists. This manual will guide you through the setup, operation, and maintenance of your Lex V2 pedal, ensuring optimal performance and longevity.

2. Қорапта не бар

• Strymon Lex Rotary Speaker Simulator Pedal V2
• Нәр беруші
• Пайдаланушы нұсқаулығы

3. Орнату

3.1 қуат талаптары

The Lex V2 pedal requires a 9V DC power supply, providing 300 microamps of current. Use only the included power supply or a compatible isolated power supply to prevent damage.

3.2 Connecting Your Pedal

Құралды желіге қосыңыз IN jack. For mono output, use the ШЫҚТЫ Л. jack. For stereo output, connect to both ШЫҚТЫ Л. және Р jacks. The pedal supports both mono and stereo input sources via a TRS input switch.

Figure 1: Rear panel connections of the Lex V2 pedal, including input, output, USB, and EXP/MIDI ports.

3.3 MIDI and Expression Pedal Connectivity

The EXP/MIDI jack allows for full MIDI control via a TRS 1/4" cable or USB-C. This enables control over various parameters and access to 300 MIDI preset locations. An expression pedal can also be connected here for real-time control of selected parameters.

4. Operating Your Lex V2 Pedal

The Lex V2 offers a comprehensive set of controls to shape your rotary speaker tone. Familiarize yourself with each knob and switch for optimal sound sculpting.

2 -сурет: Аяқталдыview of the Lex V2 pedal's control surface.

4.1 Басқару түймелері

• ЖЫЛДАМДЫҚ: Adjusts the rotation speed of the simulated rotary speaker.
• MIC DISTANCE: Controls the simulated distance of the microphones from the rotary speaker, affecting stereo width and room ambience.
• HORN LEVEL: Adjusts the output level of the rotating horn, allowing it to cut through the mix or blend more subtly.
• АЛДЫНДАAMP ДРАЙВ: Adds grit and harmonic richness, simulating the tube-driven amplifier of a classic rotary speaker.
• ДАУЫС: Boosts or cuts the overall output level by up to 6dB.
• ҚҰРҒАҚ: Mixes in your dry signal, allowing for parallel processing.

3-сурет: Егжей-тегжейлі view of the RAMP, VOLUME, PREAMP DRIVE, and DRY controls.

4.2 Switches and Footswitches

• MIC (front/rear): Selects the microphone placement, either in front or behind the simulated cabinet.
• RAMP (slow/med/fast): Controls the acceleration/deceleration rate when switching between slow and fast rotary speeds.
• SLOW/FAST Footswitch: Toggles between slow and fast rotary speeds. Hold down for a gradual rotary brake effect.
• ON Footswitch: Әсерді қосады немесе айналып өтеді.

4-сурет: Егжей-тегжейлі view of the MIC, SPEED, MIC DISTANCE, HORN LEVEL, and SLOW/FAST footswitch.

4.3 Негізгі мүмкіндіктер

• Complete Rotary Speaker System: Accurately reproduces the low-frequency bass rotor, rotating treble horn, tube-driven amplifier, and finely tuned microphone placement.
• Premium Analog JFET Input Circuit: Ensures superb responsiveness to your playing dynamics.
• Full MIDI Control: Control every switch, knob, and setting remotely via MIDI commands.
• 300 MIDI Preset Locations: Store and recall a vast array of custom sounds.

Figure 5: Visual representation of the premium analog JFET input circuit, rotor speed control, and full MIDI capabilities.

4.4 Өнімнің демонстрациялық бейнесі

5. Техникалық қызмет көрсету

To ensure the longevity and optimal performance of your Lex V2 pedal, follow these maintenance guidelines:

• Тазалау: Педалдың сыртын тазалау үшін жұмсақ, құрғақ шүберекті пайдаланыңыз. Абразивті тазартқыштардан немесе еріткіштерден аулақ болыңыз.
• Сақтау орны: Педальді салқын, құрғақ жерде, тікелей күн сәулесінен және төтенше температурадан алыс жерде сақтаңыз.
• Қуат: Педаль ұзақ уақыт бойы пайдаланылмаған кезде әрқашан қуат көзінен ажыратыңыз.

6. Ақаулықтарды жою

If you encounter any issues with your Lex V2 pedal, refer to the following common troubleshooting steps:

• Дыбыс жоқ: Check all cable connections (input, output, power). Ensure the pedal is receiving power and the ON footswitch is engaged. Verify your instrument and ampкөтергіш дұрыс жұмыс істейді.
• Қажетсіз шу: Ensure you are using an isolated power supply. Check for faulty cables or interference from other electronic devices.
• Басқару элементтері жауап бермейді: Perform a factory reset (refer to the full user manual for specific instructions). If the issue persists, contact Strymon support.

7. Техникалық сипаттамалар

8. Кепілдік

The Strymon Lex Rotary Speaker Simulator Pedal V2 comes with a 2 жылдық кепілдік. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, visit the official Strymon webсайт.

9. Қолдау

For further assistance, technical support, or to register your product, please visit the official Strymon website or contact their customer service department. You can find additional resources, FAQs, and firmware updates online.