Zinus AJ-FPPVGR-12S

ZINUS Maddon Upholstered Platform Bed Frame - Single, Dark Gray

Model: AJ-FPPVGR-12S

1. Кіріспе

This manual provides instructions for the assembly, safe use, and maintenance of your ZINUS Maddon Upholstered Platform Bed Frame. Please read these instructions carefully before assembly and retain for future reference.

ZINUS Maddon Upholstered Platform Bed Frame, Single, Dark Gray

Image 1.1: ZINUS Maddon Upholstered Platform Bed Frame in Dark Gray, Single size.

2. Қауіпсіздік туралы ақпарат

Adhering to these safety guidelines will help prevent injury and damage to the product.

  • Always use a mattress with a thickness of 15 cm (6 inches) or more to ensure proper support and product longevity.
  • Do not place a futon directly on the bed frame slats. Direct body pressure on the slats without a mattress can cause damage to the frame.
  • Avoid jumping on the bed frame. Concentrated weight or impact can lead to structural damage.
  • Assembly requires two or more adults. Attempting to assemble alone may result in injury or damage.
  • During assembly, ensure sufficient clear space and protect your floor with a mat or similar covering to prevent scratches.
  • This product is designed for household furniture use only. Do not use it for purposes other than its original intent, as this may cause unexpected accidents or injuries.

3. Пакет мазмұны

Before beginning assembly, verify that all parts are present and undamaged. The bed frame is designed for compact shipping, with many components stored within the headboard.

  • Bed Frame Body (Upholstered side rails and footboard)
  • Бас киім
  • Ағаш тақталар
  • Assembly Tools (Hex key, wrench)
  • Hardware (Bolts, washers, nuts)
  • Пластикалық аяқ
Compact packaging with bed frame parts stored inside the headboard

Image 3.1: Illustration of bed frame components stored within the headboard for compact shipping.

4. Құрастыру нұсқаулары

Estimated assembly time: 15-30 minutes with 2 adults.

  1. Компоненттерді қаптамадан шығару: Carefully open the packaging. All parts, including tools and hardware, are typically stored inside the zippered compartment of the headboard.
  2. Бөлшектерді анықтау: Lay out all components and identify them using the included instruction sheet. Note that some screw parts may be pre-attached to the main body; check these before proceeding.
  3. Жақтауды құрастыру: Follow the numbering system (if present on parts) to connect the side rails to the headboard and footboard. Use the provided bolts and tools to secure connections. Do not overtighten bolts until the frame is fully assembled.
  4. Пластикалық аяқтарды бекітіңіз: Securely attach the plastic feet to the designated points on the bed frame.
  5. Тақталарды орнату: Place the wooden slats across the bed frame. Ensure they are evenly spaced and secured according to the instructions. The slats provide ventilation and support for your mattress.
  6. Соңғы қатайту: Once all components are in place, go back and securely tighten all bolts.
Diagram showing wooden slats, plastic feet, and numbering system for assembly

Image 4.1: Key features for assembly: wooden slats for breathability, plastic feet for stability, and a numbering system for easy setup.

5. Пайдалану нұсқаулары

  • Ensure the bed frame is placed on a flat, level surface to prevent wobbling and ensure stability.
  • Барлық бұрандалар мен қосылымдардың тығыз болуын қамтамасыз ету үшін оларды жүйелі түрде тексеріңіз. Қажет болса, қайта қатайтыңыз.
  • The maximum recommended weight capacity for this single bed frame is 120 kg (264 lbs). Do not exceed this limit.

6. Техникалық қызмет көрсету

Төсек жақтауының сыртқы түрін және ұзақ қызмет ету мерзімін сақтау үшін:

  • Wipe the upholstered surfaces with a dry cloth to remove dust and light debris.
  • For spills, blot immediately with a clean, dry cloth. Avoid using harsh chemicals or abrasive cleaners, as these may damage the fabric.
  • Keep the bed frame away from direct sunlight and heat sources to prevent fading or material degradation.

7. Техникалық сипаттамалар

АтрибутМәлімет
Үлгі нөміріAJ-FPPVGR-12S
ӨлшемБойдақ
ТүсҚою сұр
СтильТік жолақ
МатериалдарPolyester, Wood, Steel
Өнім өлшемдері (L x W x H)195 см x 97 см x 30.5 см
Өнімнің салмағы22.23 кг
Ең көп ұсынылатын салмақ120 кг
Төсек астын тазарту16 см
Құрастыру қажетИә
Бас киім материалыFabric (Upholstered)
Ерекше өзгешеліктеріSlats, No Box Spring Required, Upholstered, Durable
Шығу еліҚытай
Diagram showing dimensions for Single, Semi-Double, and Double bed frames

Image 7.1: Dimensional specifications for ZINUS Maddon bed frames (Single, Semi-Double, Double).

8. Кепілдік және қолдау

ZINUS provides a 5-year manufacturer's warranty against product defects. Please retain your proof of purchase for warranty claims.

For further assistance or to report any issues, please contact ZINUS customer support through the retailer where you purchased the product.

ZINUS 5-year warranty badge

Image 8.1: ZINUS offers a 5-year manufacturer's warranty.

© 2024 ZINUS. Барлық құқықтар қорғалған.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.