Delock USB4 40 Gbps Enclosure for 1 x M.2 NVMe SSD - Tool-Free Model 42012 Instruction Manual

1. Өнім аяқталдыview

The Delock USB4 40 Gbps Enclosure (Model 42012) provides a high-speed, tool-free solution for externalizing one M.2 NVMe SSD. This enclosure supports data transfer rates up to 40 Gigabits Per Second, making it ideal for demanding applications requiring fast storage access. Its robust design ensures reliable performance and portability.

Image 1: Delock USB4 40 Gbps Enclosure retail packaging. The image displays the product box, showing the enclosure and its components.

2. Пакет мазмұны

Пакетте барлық элементтердің бар екенін тексеріңіз:

• 1 x Delock USB4 40 Gbps Enclosure (Model 42012)
• 1 x USB4 Cable (USB-C to USB-C)
• 2 x Thermal Pads for M.2 SSD
• 2 x M.2 SSD Mounting Screws
• 1 x Screen protector (as per product listing)
• 1 x Пайдаланушы нұсқаулығы (осы құжат)

Image 2: Included accessories. This image shows the USB-C to USB-C cable, two thermal pads, and two small screws, which are typically used for securing an M.2 SSD.

3. Жүйе талаптары

To ensure optimal performance, your system should meet the following requirements:

• Host device with a free USB4, Thunderbolt 3, or Thunderbolt 4 port.
• Operating System: Windows, macOS, Linux (with appropriate driver support for USB4/Thunderbolt).
• One M.2 NVMe SSD (2230, 2242, 2260, or 2280 form factor).

4. Орнату

M.2 NVMe SSD құрылғысын корпусқа орнату үшін мына қадамдарды орындаңыз:

1. Қоршауды ашыңыз: Gently slide the cover of the enclosure to open it. This enclosure is designed for tool-free access.
2. Install Thermal Pad (Optional but Recommended): If your M.2 NVMe SSD did not come with a pre-applied thermal pad, peel off the protective film from one side of the provided thermal pad and place it onto the SSD controller chip.
3. Insert M.2 NVMe SSD: Carefully align your M.2 NVMe SSD with the M-key slot inside the enclosure. Insert the SSD at a slight angle and then gently push it down until it lies flat.
4. Secure M.2 NVMe SSD: Use one of the provided mounting screws to secure the M.2 NVMe SSD in place at the opposite end of the connector.
5. Қоршауды жабыңыз: Slide the cover back onto the enclosure until it clicks securely into place.
6. Хост құрылғысына қосылу: Connect one end of the USB4 cable to the enclosure and the other end to a free USB4 or Thunderbolt port on your computer.

Image 3: Enclosure interior and M.2 NVMe slot. This image illustrates the enclosure with its top cover removed, revealing the internal circuit board and the M.2 NVMe slot ready for SSD installation.

5. Пайдалану нұсқаулары

Once the SSD is installed and the enclosure is connected to your computer, it should be automatically detected by your operating system. You may need to initialize and format the new SSD if it's not already formatted.

• Инициализация және пішімдеу: For new SSDs, open Disk Management (Windows) or Disk Utility (macOS) to initialize the disk and create a new partition. Follow the on-screen prompts.
• Деректерді тасымалдау: Сүйреп апарыңыз files to and from the external SSD as you would with any other storage device. The USB4 interface provides high-speed data transfer.
• Қауіпсіз жою: Always safely eject the device from your operating system before disconnecting the cable to prevent data corruption.

6. Техникалық қызмет көрсету

Дұрыс күтім сіздің қоршауыңыздың ұзақ қызмет етуін және өнімділігін қамтамасыз етеді:

• Тазалау: Use a soft, dry cloth to clean the exterior of the enclosure. Avoid liquid cleaners or solvents.
• Сақтау орны: Store the enclosure in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
• Өңдеу: Avoid dropping or subjecting the enclosure to strong impacts, as this can damage the internal components.

7. Ақаулықтарды жою

Мәселелерге тап болсаңыз, келесі жалпы мәселелер мен шешімдерді қараңыз:

• Қоршау анықталмады:
  • Ensure the USB4 cable is securely connected to both the enclosure and the host device.
  • Try connecting to a different USB4 or Thunderbolt port on your computer.
  • Verify that the M.2 NVMe SSD is correctly seated and secured inside the enclosure.
  • Test with a different USB4 cable if available.
• Баяу деректерді беру жылдамдығы:
  • Ensure your host device has a USB4 or Thunderbolt port capable of 40 Gbps. Connecting to a slower USB port will limit performance.
  • Verify that your M.2 NVMe SSD is capable of high speeds.
  • Close other applications that might be consuming system resources or disk I/O.
• SSD not appearing in "My Computer" or "Finder":
  • For new SSDs, it needs to be initialized and formatted via Disk Management (Windows) or Disk Utility (macOS).
  • Check device manager (Windows) or system information (macOS) to see if the device is recognized at a lower level.

8. Техникалық сипаттамалар

9. Кепілдік және қолдау

This Delock product is covered by a Manufacturer Guarantee. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Delock webсайт.

For technical support, troubleshooting assistance, or further inquiries, please contact Delock customer service through their official support channels. Contact information can typically be found on the Delock webсайтында немесе өнім қаптамасында.