DANOPLUS KB0296

DANOPLUS WBGT + HI Heat Stress Meter KB0296 Instruction Manual

1. Кіріспе

The DANOPLUS WBGT + HI Heat Stress Meter (Model KB0296) is a portable device designed to measure and monitor heat stress levels in various environments. It provides simultaneous readings for Wet Bulb Globe Temperature (WBGT), Heat Index (HI), Air Temperature, and Relative Humidity (RH). This manual provides essential information for the proper setup, operation, and maintenance of your device.

DANOPLUS WBGT + HI Heat Stress Meter displaying WBGT, Temperature, and Humidity readings.

Image 1: The DANOPLUS WBGT + HI Heat Stress Meter, a 2-in-1 device for measuring heat stress.

Негізгі ерекшеліктері:

  • Simultaneous display of WBGT, HI, Air Temperature, and Relative Humidity.
  • Switchable IN/OUT mode for indoor and outdoor measurements.
  • Programmable buzzer and red LED danger zone warning.
  • Adjustable audible alarm volume (75dB / 60dB / mute).
  • Adjustable alarm threshold.
  • Төмен батарея көрсеткіші.
  • Direct radiation effect measurement with ABS black globe.
  • Wearable design with included arm strap and tripod mountable option.

2. Пакет мазмұны

Барлық заттардың бар және зақымдалмағанына көз жеткізу үшін алған кезде пакеттің мазмұнын тексеріңіз:

  • 1 x DANOPLUS WBGT + HI Heat Stress Meter (Model KB0296)
  • 2 x ілмектер
  • 1 x Arm Strap
  • 2 x AAA батареялары
  • 1 x Ағылшын тіліне арналған нұсқаулық
Box contents of the WBGT and Heat Index Checker, showing the device, arm strap, buckles, and manual.

Image 2: The DANOPLUS WBGT + HI Heat Stress Meter with its packaging and included accessories.

3. Қауіпсіздік туралы ақпарат

  • Құрылғыны іске қоспас бұрын осы нұсқаулықты мұқият оқып шығыңыз.
  • Құрылғыны ұзақ уақыт бойы тікелей күн сәулесіне, жоғары ылғалдылыққа немесе шамадан тыс температураға ұшыратпаңыз.
  • Құрылғыны түсіріп алмаңыз немесе қатты соққыларға ұшырамаңыз.
  • Құрылғыны бөлшектеуге немесе өзгертуге әрекеттенбеңіз. Бұл кепілдіктің күшін жояды.
  • Құрылғыны балалардың қолы жетпейтін жерде сақтаңыз.
  • Пайдаланылған батареяларды жергілікті ережелерге сәйкес тастаңыз.

4. Орнату

4.1 Батареяны орнату

  1. Құрылғының артқы жағындағы батарея бөлігінің қақпағын табыңыз.
  2. Бөлімді ашу үшін қақпақты сырғытыңыз немесе ашыңыз.
  3. Дұрыс полярлықты (+/-) қамтамасыз етіп, екі AAA батареясын салыңыз.
  4. Батарея бөлігінің қақпағын мықтап орнына салыңыз.

4.2 Бастапқы қуат қосу

түймесін басып тұрыңыз POWER/SET button to turn on the device. The display will illuminate and show the current readings.

4.3 Орнату опциялары

The device offers flexible mounting for various applications:

  • Wearable Strap: Attach the arm strap using the provided buckles to wear the device on your arm for personal monitoring.
  • Штатив орнату: The device has a standard tripod screw hole for mounting on a tripod (tripod not included).
  • Қабырғаға бекіту: Use the integrated slots on the back of the device to hang it on a wall or other vertical surface.
Three ways to use the heat stress meter: wearable strap, tripod mounting, and wall mount.

Image 3: The DANOPLUS WBGT + HI Heat Stress Meter demonstrating its three usage modes: wearable, tripod-mounted, and wall-mounted.

5. Операция

5.1 Дисплейді түсіну

The digital display shows the following measurements:

  • WBGT: Wet Bulb Globe Temperature.
  • Сәлем: Жылу индексі.
  • ТЕМП: Ауа температурасы.
  • ЫЛҒАЛДЫҚ: Салыстырмалы ылғалдылық.

The display also indicates the current mode (IN/OUT) and alarm status.

5.2 Switching IN/OUT Mode

түймесін басыңыз РЕЖИМ button (usually indicated by an arrow or 'IN/OUT' symbol) to toggle between indoor (IN) and outdoor (OUT) measurement modes. The appropriate icon will appear on the display.

5.3 Setting Alarm Thresholds

  1. түймесін басып тұрыңыз ОРНАТУ button until the alarm threshold value starts flashing.
  2. пайдаланыңыз UP және ТӨМЕН arrow buttons to adjust the desired WBGT or HI alarm threshold.
  3. түймесін басыңыз ОРНАТУ again to confirm and move to the next setting, or wait for the display to return to normal operation.

5.4 Adjusting Alarm Volume

The device features an adjustable audible alarm. Press the DOLUM button (if available, or cycle through settings with ОРНАТУ) to switch between 75dB, 60dB, or mute. A visual indicator on the display will confirm the selected volume level.

Diagram showing adjustable audible alarm volume settings: 75dB, 60dB, and Mute.

Image 4: The device offers adjustable alarm volume settings for 75dB, 60dB, or mute.

5.5 Interpreting Danger Zone Indicators

The meter provides visual and audible warnings when heat stress levels exceed predefined thresholds. A red LED will flash, and the buzzer will sound when the measured value is over the alarm threshold. The display also shows specific danger level indicators:

  • Абайлаңыз: WBGT: 26.7 ~ 29.4 °C (80 ~ 84.9 °F) / HI: 27 ~ 31.9 °C (80.6 ~ 89.4 °F)
  • Өте сақтық: WBGT: 29.4 ~ 31 °C (85 ~ 87.9 °F) / HI: 32 ~ 40.9 °C (89 ~ 105.6 °F)
  • Қауіп: WBGT: 31 ~ 32.2 °C (88 ~ 89.9 °F) / HI: 41 ~ 53.9 °C (105.7 ~ 129 °F)
  • Extreme Danger: WBGT: > 32.2 °C (> 90 °F) / HI: ≥ 54 °C (> 129 °F)
Дисплей эксamples of the heat stress meter showing different danger zone indicators: Caution, Extreme Caution, Danger, and Extreme Danger, with corresponding WBGT and Heat Index ranges.

Сурет 5: Мысалыamples of the danger zone indicators on the display, showing WBGT and Heat Index thresholds.

Close-up of the heat stress meter showing the red LED alarm light activated.

Image 6: The red LED alarm light indicates when measured heat stress values exceed the set threshold.

6. Техникалық қызмет көрсету

6.1 Тазалау

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure no liquid enters the device openings.

6.2 Батареяны ауыстыру

When the low battery indicator appears on the display, replace the AAA batteries as described in Section 4.1. Remove batteries if the device will not be used for an extended period.

6.3 Сақтау

Құрылғыны салқын, құрғақ жерде, тікелей күн сәулесінен және жоғары температурадан алыс сақтаңыз. Пайдаланылмаған кезде оны бастапқы қаптамасында немесе қорғаныс қаптамасында сақтаңыз.

7. Ақаулықтарды жою

МәселеЫқтимал себебіШешім
Құрылғы қосылмайды.Өлген немесе дұрыс орнатылмаған батареялар.Батареяның полярлығын тексеріңіз немесе жаңа AAA батареяларымен ауыстырыңыз.
Дәл емес оқулар.Sensor obstruction or device not stabilized.Ensure sensors are clean and unobstructed. Allow 15-25 minutes for stabilization in a new environment.
Дабыл естілмейді.Alarm volume muted or threshold not met.Check alarm volume settings. Verify alarm threshold is set correctly and current readings exceed it.
Дисплей күңгірт немесе жыпылықтайды.Төмен батарея қуаты.Батареяларды ауыстырыңыз.

8. Техникалық сипаттамалар

ПараметрМән
Үлгі нөміріKB0296
Ауа температурасының диапазоны0 ~ 50 ° C (32 ~ 122 ° F)
WBGT Temperature Range0 ~ 50 ° C (32 ~ 122 ° F)
HI Temperature Range0 ~ 60 ° C (32 ~ 140 ° F)
Ылғалдылық диапазоны0.1 ~ 99.9% RH
Ауа температурасының дәлдігі± 0.6 °C
Ылғалдылық дәлдігі10 ~ 90% RH @ 25 °C: typical 5%, others 7%
Ажыратымдылық0.1 °C / °F, 0.1% RH
Тұрақтандыру уақыты15 ~ 25 minutes (typical)
Батареяның қызмет ету мерзіміШамамен 300 сағат
Қуат көзі2 x AAA батареялары
Өлшемдері (H x W x L)70 x 60 x 22 мм
СалмағыШамамен 90 г
Дисплей түріСандық СКД
Жауап беру уақыты20 секунд

9. Кепілдік және қолдау

DANOPLUS products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official DANOPLUS webсайт. Кез келген кепілдік шағымдары үшін сатып алуды растайтын құжатты сақтаңыз.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.