APIELE 10 Amp 19mm Latching Push Button Switch User Manual

Кіріспе

This user manual provides detailed instructions for the installation, operation, and maintenance of the APIELE 10 Amp 19mm Latching Push Button Switch. This high-quality metal switch is designed for various applications, including automotive, motorcycle modification, and control equipment.

Қауіпсіздік туралы ақпарат

• Ensure power is disconnected before installation or maintenance to prevent electrical shock.
• Көлемді растауtage and current ratings match your application to avoid damage to the switch or connected devices.
• Do not exceed the specified 10 Amp current rating or 12V operating voltage.
• Handle with care to avoid damaging internal components.
• If you are unsure about any installation steps, consult a qualified electrician.

Өнім аяқталдыview

The APIELE 10 Amp 19mm Latching Push Button Switch features a durable metal construction and an integrated LED ring. It is designed for reliable performance in various environments.

Негізгі ерекшеліктері:

• Latching Operation: Push once for ON, push again for OFF.
• Жоғары ток рейтингі: 10 Amps.
• Жарықдиодты жарықтандыру: 12V LED ring for status indication.
• Тұрақты құрылыс: High-quality metal material.
• IP65 су өткізбейтін: Suitable for wet or dusty environments.
• Ұзақ өмір сүру ұзақтығы: Electrical life of 200,000 times, mechanical life of 1,000,000 cycles.

Құрамдас бөліктер:

The product includes the push button switch and a connector for wiring.

• 1 x Latching Push Button Switch
• 1 x Connector with pre-attached wires

Figure 1: APIELE 10 Amp 19mm Latching Push Button Switch (Red LED, Silver Stainless Steel).

Figure 2: Various angles of the APIELE push button switch, showcasing оның берік дизайны.

Figure 3: Comparison highlighting the larger press part and stronger contact terminals of the new design (right) compared to the old design (left).

Figure 4: Illustration of the switch's durability, rated for 200,000 press times and 40,000 hours of lamp өмір.

Figure 5: Visual representation of the IP65 waterproof protection, indicating suitability for wet or dusty environments.

Техникалық сипаттамалар

Figure 6: Detailed technical specifications and dimensions of the switch.

Орнату және орнату

Follow these steps for proper installation of your APIELE Latching Push Button Switch.

Электр схемасы:

The switch comes with a pre-wired connector for ease of installation. Refer to the diagram below for pin assignments:

• Қызыл сым: Positive LED Pin "+"
• Қара сым: Negative LED Pin "-"
• Көк сым: Normal Open Pin

Figure 7: Wiring diagram showing the function of each colored wire on the connector.

Орнату қадамдары:

1. Орнату тесіктерін дайындаңыз: Drill a 19mm (3/4 inch) diameter hole in the desired mounting surface.
2. Қосқышты енгізу: Insert the switch body into the prepared hole from the front.
3. Жаңғақпен бекітіңіз: Thread the securing nut onto the switch body from the back and tighten it to hold the switch firmly in place.
4. Сымдарды қосу: Attach the provided connector to the switch terminals. Ensure correct polarity for the LED function.

Figure 8: Visual guide for the installation process of the push button switch.

Пайдалану нұсқаулары

The APIELE Latching Push Button Switch operates with a simple ON-OFF mechanism.

• To turn on the connected device, press the button once. The LED ring will illuminate, indicating the switch is in the ON state.
• To turn off the connected device, press the button again. The LED ring will turn off, indicating the switch is in the OFF state.

Қолданбалар:

This versatile switch is suitable for a wide range of applications, including but not limited to:

• Automobile and motorcycle modifications
• Control equipment switch modifications
• Doorbell buttons
• SOS buttons
• Elevator buttons
• Тұрмыстық техника

9 -сурет: Мысалыamples of common applications for the APIELE push button switch, including doorbell, car, and elevator buttons.

Техникалық қызмет көрсету

The APIELE Latching Push Button Switch is designed for minimal maintenance due to its durable construction and IP65 waterproof rating.

• Тазалау: Wipe the switch surface with a soft, damp матаны. Өңдеуді немесе ішкі компоненттерді зақымдауы мүмкін абразивті тазалағыштарды немесе еріткіштерді пайдаланудан аулақ болыңыз.
• Тексеру: Сымдар қосылыстарының сенімді және коррозиядан таза екеніне көз жеткізу үшін оларды мезгіл-мезгіл тексеріп отырыңыз.
• Қоршаған ортаны қорғау: While waterproof, prolonged submersion is not recommended. Ensure the mounting area is properly sealed if exposed to extreme moisture.

Ақаулықтарды жою

Кепілдік және қолдау

APIELE products are manufactured to high standards. For any issues or support inquiries, please contact APIELE Electric directly through their official channels or the retailer from whom the product was purchased.

-ге барыңыз APIELE Store on Amazon қосымша ақпарат және байланыс опциялары үшін.