sunbelt B1SUT35D

Sunbelt B1SUT35D Heavy Duty Turf Tire Instruction Manual

Model: B1SUT35D

Кіріспе

This manual provides essential instructions for the safe and effective use, installation, and maintenance of your Sunbelt B1SUT35D Heavy Duty Turf Tire. Please read this manual thoroughly before installation and operation to ensure proper handling and longevity of the product.

Sunbelt B1SUT35D Heavy Duty Turf Tire

Image: Sunbelt B1SUT35D Heavy Duty Turf Tire. This image displays the tire's tread pattern and overall structure, highlighting its robust design for turf applications.

Қауіпсіздік туралы ақпарат

Always prioritize safety when handling and installing tires. Improper installation or inflation can lead to serious injury or property damage.

  • Ensure the tire is compatible with your equipment's rim size and specifications.
  • Do not exceed the maximum recommended PSI (Pounds Per Square Inch) for inflation.
  • Always use appropriate tools and personal protective equipment (PPE) during installation.
  • Seek professional assistance if you are unsure about any installation steps.

Орнату және орнату

This section outlines the general steps for installing the Sunbelt B1SUT35D tire. This tire is designed for use on lawn mowers, go-karts, and garden tractors.

Қажетті құралдар:

  • Tire mounting tools (tire irons, bead breaker)
  • Air compressor with pressure gauge
  • Қауіпсіздік көзілдіріктер мен қолғаптар
  • Lubricant (tire soap or approved tire mounting lubricant)

Орнату қадамдары:

  1. Жиекті дайындаңыз: Ensure the rim is clean, free of rust, and any old tire residue. Inspect for damage.
  2. Lubricate Beads: Apply a generous amount of tire lubricant to both beads of the new tire and the rim flanges.
  3. Mount the First Bead: Place the rim on a stable surface. Using tire irons, carefully work one bead of the tire over the rim flange.
  4. Mount the Second Bead: Position the rim valve stem at the bottom. Using tire irons, carefully work the second bead over the rim flange. This step may require a bead breaker or additional leverage.
  5. Шинаны үрлеу: Slowly inflate the tire using an air compressor. Listen for the beads to seat properly with an audible pop. Do not exceed 14 PSI.
  6. Ағып кетуді тексеріңіз: Once inflated, check for any air leaks around the bead area using soapy water.
  7. Final Pressure Adjustment: Adjust the tire pressure to the recommended operating PSI for your specific equipment, ensuring it does not exceed the tire's maximum PSI of 14.

Note: This tire is supplied without a rim. Ensure you have a compatible 6-inch rim for installation.

Пайдалану нұсқаулары

The Sunbelt B1SUT35D tire is designed for turf applications, providing excellent traction while minimizing damage to grass surfaces.

  • Инфляция қысымы: Maintain proper inflation pressure as specified by your equipment manufacturer, not exceeding the tire's maximum of 14 PSI. Incorrect pressure can affect performance, wear, and safety.
  • Жүктеме сыйымдылығы: Do not exceed the maximum load capacity of 365 lbs per tire. Overloading can lead to premature wear and tire failure.
  • Жылдамдық: These tires are designed for low-speed applications typical of lawn mowers, go-karts, and garden tractors. Avoid high-speed operation.
  • Беттік қолдану: Optimized for turf and soft ground. While durable, prolonged use on abrasive surfaces like concrete or asphalt can accelerate wear.

Техникалық қызмет көрсету

Regular maintenance ensures optimal performance and extends the lifespan of your Sunbelt B1SUT35D tire.

  • Шинаның қысымын тексеріңіз: Regularly check and adjust tire pressure to the recommended PSI. This should be done when the tires are cold.
  • Зақымдануды тексеру: Periodically inspect the tire for cuts, punctures, cracks, or excessive wear. Address any damage promptly.
  • Таза шиналар: Keep tires clean from debris, mud, and chemicals that could degrade the rubber.
  • Сақтау орны: If storing equipment for extended periods, ensure tires are properly inflated and stored in a cool, dry place away from direct sunlight and ozone-producing equipment.

Ақаулықтарды жою

МәселеЫқтимал себебіШешім
Rapid or uneven wearIncorrect inflation pressure, misalignment of equipment, overloading.Check and adjust tire pressure. Inspect equipment for alignment issues. Ensure load does not exceed maximum capacity.
Ауа қысымының жоғалуыPuncture, faulty valve stem, improper bead seating.Inspect for punctures and repair. Replace valve stem if necessary. Re-seat tire beads.
Poor tractionUnder-inflation, worn tread.Inflate to recommended pressure. Replace tire if tread is excessively worn.

Техникалық сипаттамалар

ЕрекшелікМәлімет
ҮлгіB1SUT35D
БрендSunbelt
Шинаның өлшемі15x6x6 (15x6-6)
Tread PatternTurf Rider- K358
Протектор түріБағытсыз
Ply рейтингі2 қабат
Rim Size Compatibility6 Inches (Rim Width 4.5)
Максималды жүктеме365 фунт
Максималды PSI14 PSI
Mounted Diameter14.4 дюйм
Mounted Width5.9 дюйм
UPC716715255764

Кепілдік және қолдау

For warranty information or technical support regarding your Sunbelt B1SUT35D tire, please contact the manufacturer directly or refer to the official Sunbelt webсайт. Сатып алуды растау ретінде сатып алу түбіртегіңізді сақтаңыз.

Manufacturer: Sunbelt

Note: Specific warranty terms may vary. Please consult the official warranty documentation provided at the time of purchase.

© 2023 Sunbelt. All rights reserved.

This manual is for informational purposes only. Sunbelt is not responsible for any damages or injuries resulting from improper installation or use of this product.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.