Bogen AT10A 10-Watt Attenuator User Manual

Кіріспе

This manual provides detailed instructions for the installation, operation, and maintenance of the Bogen AT10A 10-Watt Attenuator. The AT10A is designed to control the volume of individual speakers or groups of speakers in a constant voltage (70V or 25V) audio distribution system.

Please read this manual thoroughly before installation and operation to ensure proper use and to prevent damage to the unit or connected equipment.

Өнім аяқталдыview

Сурет: алдыңғы view of the Bogen AT10A 10-Watt Attenuator. The unit features a silver faceplate with a black rotary volume knob. The knob is marked with numbers from 0 to 10, indicating volume levels. The Bogen logo is visible at the bottom center, and "AT-10A" is printed in the bottom right corner.

The Bogen AT10A is a wall-plate style attenuator, providing 10 steps of volume control plus an "OFF" position. It is suitable for use with 25V or 70V constant voltage speaker lines and has a power rating of 10 watts.

Орнату және орнату

Қауіпсіздік шаралары

• Ensure all power to the audio system is disconnected before beginning installation.
• Орнатуды білікті мамандар жергілікті электр ережелеріне сәйкес орындауы керек.
• Do not exceed the maximum power rating of 10 watts.

Монтаждау

1. The AT10A is designed to fit into a standard single-gang electrical box.
2. Secure the electrical box in the desired wall location.
3. Ensure adequate space for wiring connections behind the attenuator.

Сымдарды қосу

The AT10A features screw terminals for input and output connections. Refer to the diagram below for typical wiring.

• Тұрақты көлемді қосыңызtage audio source (e.g., amplifier output) to the "INPUT" terminals.
• Connect the speaker(s) to be controlled to the "OUTPUT" terminals.
• Maintain correct polarity (+ to + and - to -) for all connections.
• Ensure all connections are secure and free from short circuits.

(Note: A detailed wiring diagram would typically be provided here by the manufacturer. For this manual, general instructions are given.)

Пайдалану нұсқаулары

The Bogen AT10A provides simple rotary control for adjusting the volume level of connected speakers.

1. Қуат қосулы: After installation, restore power to the audio system.
2. Дыбыс деңгейін реттеу: Rotate the knob clockwise to increase the volume and counter-clockwise to decrease it.
3. Дыбыс деңгейі: The knob features marked positions from 0 to 10. Position '0' represents the "OFF" or minimum volume setting, while '10' represents the maximum volume setting.
4. Дәл күйге келтіру: Adjust the knob gradually to achieve the desired listening level.

Техникалық қызмет көрсету

The Bogen AT10A is designed for reliable, long-term operation with minimal maintenance.

• Тазалау: To clean the faceplate, gently wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Тексеру: Periodically check the attenuator for any visible damage or loose connections. If any issues are found, disconnect power and address them promptly.
• Пайдаланушы қызмет көрсететін бөлшектер жоқ: The internal components of the AT10A are not user-serviceable. Do not attempt to open or repair the unit. Refer servicing to qualified personnel.

Ақаулықтарды жою

If troubleshooting steps do not resolve the issue, contact Bogen technical support or a qualified audio technician.

Техникалық сипаттамалар

Қолдау және байланыс ақпараты

For technical assistance, product inquiries, or further information, please contact Bogen Communications, Inc.

• Өндіруші: Bogen Communications, Inc.
• Webсайт: www.bogen.com (Мысampсілтеме, нақты сілтеме әртүрлі болуы мүмкін)
• Клиенттерге қызмет көрсету: Refer to the official Bogen webағымдағы байланыс мәліметтері үшін сайт.

Ескертпе: Өнімнің техникалық сипаттамалары ескертусіз өзгертілуі мүмкін.