CHANZON 3W White LED Chip (6000K-6500K) Instruction Manual

1. Кіріспе

This manual provides essential information for the safe and effective use of the CHANZON 3W White LED Chip. This high-power LED chip is designed for various DIY lighting applications, offering a bright white light with a color temperature range of 6000K to 6500K. Each pack contains 10 pieces of these super bright SMD COB light emitter components.

2. Қауіпсіздік туралы ақпарат

• Көзді қорғау: Do not stare directly into the illuminated LED chip. The intense light can cause eye strain or damage.
• Жылуды басқару: High-power LEDs generate heat. Always ensure proper heat dissipation using a suitable heat sink system. Operating the LED without adequate cooling can significantly reduce its lifespan and cause damage. The working temperature should be less than 60°C (140°F).
• Электр қауіпсіздігі: Always use a constant current LED driver with the specified current and voltage. Incorrect power supply can damage the LED chip.
• Полярлық: Observe correct polarity when connecting the LED chip. Refer to the positive (anode +) and negative (cathode -) markings on the LED.
• Өңдеу: Handle LED chips with care to avoid physical damage to the chip or its connections.

3. Өнім аяқталдыview

The CHANZON 3W White LED Chip features a robust design with double golden wires and a copper frame for enhanced durability and thermal performance. Each chip is rated for 3 Watts maximum power and emits a bright white light.

Figure 3.1: 3W LED Chip Dimensions and Structure. This image illustrates the physical dimensions of the LED chip and highlights its internal components, including the gold wires and chip size.

Figure 3.2: CHANZON 3W White LED Chips in Packaging. This image shows a pack of 10 CHANZON 3W White LED chips, as typically supplied.

Негізгі ерекшеліктері:

• Қуат: 3 Вт (макс)
• Шығарылатын түс: White (6000K-6500K)
• Ұсынылатын ток: 600mA - 700mA
• Forward Voltage: 3.0В - 3.4В
• Жарық ағыны: 260LM - 280LM
• Emitting Angle: 120-140 градус
• Құрылысы: Double Golden Wire (99.99%) and Copper Frame
• Өмір сүру ұзақтығы: Approximately 50,000 hours with proper heat management.

Полярлықты анықтау:

The LED chip has clear markings for its positive (Anode +) and negative (Cathode -) terminals. Correct polarity is crucial for operation.

4. Техникалық сипаттамалар

5. Орнату

5.1 Required Components:

• Constant Current LED Driver: Essential for providing the correct current (600mA-700mA) and voltage (3.0V-3.4V) to the LED chip. Using a constant voltage supply without a current limiting resistor or driver will damage the LED.
• Heat Sink System: A heat sink is mandatory to dissipate heat generated by the LED chip and ensure its longevity.
• Thermal Paste/Adhesive: To ensure efficient heat transfer between the LED chip and the heat sink.
• Сымдар: Appropriate gauge wires for electrical connections.

5.2 Орнату қадамдары:

1. Prepare Heat Sink: Apply a thin, even layer of thermal paste or adhesive to the contact surface of the heat sink.
2. Mount LED Chip: Carefully place the LED chip onto the prepared heat sink, ensuring good contact. Secure it if necessary (e.g., with screws if the heat sink has mounting points, or using thermal adhesive).
3. Сымдарды қосу: Identify the Anode (+) and Cathode (-) terminals on the LED chip. Connect the positive output of your constant current LED driver to the Anode (+) terminal and the negative output to the Cathode (-) terminal.
4. Қосылымдарды тексеру: Double-check all electrical connections for correct polarity and secure contact.
5. Қуат қосулы: Once all connections are secure and verified, connect the LED driver to its power source.

5.3 Recommended Accessories:

• Constant current LED drivers (600mA Plastic Case)
• Constant current LED drivers (600mA Aluminum Case Waterproof)
• Constant current LED drivers (600mA No Case only PCB Board)
• LED Heat Sink Star Aluminum Base Plate

6. Жұмыс жасау

Once properly installed with a constant current driver and heat sink, the LED chip will illuminate when power is supplied to the driver. Ensure the operating environment allows for adequate airflow around the heat sink to maintain optimal temperature.

• Optimal Current: Operate the LED chip within the recommended current range of 600mA to 700mA for best performance and lifespan.
• Температураны бақылау: Periodically check the temperature of the heat sink. If it feels excessively hot to the touch, improve the cooling system.

7. Техникалық қызмет көрсету

The CHANZON 3W White LED Chip requires minimal maintenance. Regular checks can help ensure its long-term performance.

• Тазалау: Keep the LED chip and heat sink free from dust and debris. A soft, dry cloth can be used for cleaning. Ensure the power is disconnected before cleaning.
• Heat Sink Inspection: Periodically inspect the heat sink for any obstructions to airflow or signs of corrosion.
• Қосылымды тексеру: Барлық электр қосылымдарының сенімді және коррозиядан таза екеніне көз жеткізіңіз.

8. Ақаулықтарды жою

8.1 LED Not Lighting Up:

• Қуат көзін тексеріңіз: Ensure the constant current LED driver is receiving power and is functioning correctly.
• Полярлықты тексеру: Confirm that the LED chip is connected with the correct positive (+) and negative (-) polarity.
• Қосылымдарды тексеру: Check for loose or faulty wiring connections between the driver and the LED chip.
• Драйвер үйлесімділігі: Ensure the LED driver's output specifications (current and voltage) match the LED chip's requirements.

8.2 LED Flickering or Dim:

• Power Supply Instability: The constant current driver might be faulty or receiving an unstable input voltage.
• Қызып кету: Insufficient heat dissipation can cause the LED to dim or flicker as a protective measure. Ensure the heat sink is adequate and properly installed.
• Current Fluctuation: The driver might not be supplying a stable constant current.

8.3 Reduced Lifespan:

• Шамадан тыс қызу: The most common cause of reduced LED lifespan. Always ensure the LED operates below 60°C (140°F) with an effective heat sink.
• Шамадан тыс ток: Operating the LED above its recommended current will significantly shorten its life.
• Тtage Spikes: Unstable power supply with voltage spikes can degrade the LED over time.

9. Қолданбалар

The CHANZON 3W White LED Chip is versatile and suitable for a wide range of lighting projects and applications, including but not limited to:

• Жарықдиодты шамдар
• Cast Lights
• Прожекторлар
• Stage Шамдар
• Су астындағы Лamps
• Проекция Л.amps
• Өсімдіктерді өсіру шамдары
• Ультракүлгін сәулемен емдеу Lamps (with appropriate UV LED chips)
• Mining Lamps
• Automotive Lighting
• Өнеркәсіптік жарықтандыру

10. Кепілдік және қолдау

For any questions, technical assistance, or warranty inquiries regarding your CHANZON 3W White LED Chips, please contact CHANZON customer support through the retailer where the product was purchased or visit the official CHANZON store online.