CHANZON 1DGL-JC-20W-NW

CHANZON High Power LED Chip 20W Natural White (4000K-4500K) Instruction Manual

Кіріспе

This manual provides essential information for the proper installation, operation, and maintenance of your CHANZON High Power LED Chip 20W Natural White. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.

CHANZON 20W Natural White LED Chip

Image: CHANZON 20W Natural White LED Chip, showcasing оның ықшам дизайны.

Өнімнің техникалық сипаттамалары

Техникалық сипаттамаМән
БрендШАНЗОН
Үлгі нөмірі1DGL-JC-20W-NW
Қуат20 Вт (макс)
Түсті шығаруТабиғи ақ
Түс температурасы4000K-4500K
Ұсынылатын ток600мА
Forward Voltage30-34 В
Жарық ағыны1600-1800LM
Emitting Angle120-140 градус
Чип түріIntegrated COB LED Panel, 30mil chips
Сым материалыDouble Golden Wire (99.99%)
Рама материалыCopper Frame
Өмір сүру ұзақтығы50,000 Hours (with proper heat management)
Өнім өлшемдері6.69 x 5.12 x 0.39 дюйм
Элемент салмағы0.352 унция

The CHANZON LED chip features a high-quality COB LED panel with high brightness, double golden wire, and a copper frame for enhanced performance and durability.

Егжей-тегжейлі view of CHANZON LED chip construction with copper holder and gold wires

Image: Internal construction of the CHANZON LED chip, highlighting the 100% copper holder and 2 gold wires for improved conductivity and heat dissipation.

Орнату және орнату

  1. Қуат көзін таңдау: Use a constant current LED driver that matches the recommended current (600mA) and forward voltage (30-34V) for this 20W LED chip. Incorrect power supply can damage the LED.
  2. Heat Sink System: A heat sink system is mandatory for proper operation and to achieve the stated lifespan. The working temperature of the LED chip should not exceed 60°C (140°F). Ensure the LED chip is securely mounted to an adequate heat sink.
  3. Polarity Connection: Carefully observe the positive (anode +) and negative (cathode -) markings on the LED chip. Connect the LED driver output to the corresponding terminals on the LED chip. Incorrect polarity will prevent the LED from lighting up and may cause damage.
  4. Қауіпсіз орнату: Mount the LED chip firmly to the fixture or application using appropriate fasteners. Ensure good thermal contact between the LED chip's base and the heat sink.

For compatible constant current LED drivers, search for "Chanzon 600mA Constant Current LED Driver" on Amazon (e.g., B01N374QMQ for plastic case, B01MSANK1C for aluminum case waterproof, B01N6U68LI for PCB board only).

CHANZON LED chip with positive and negative terminals marked

Image: CHANZON LED chip showing the anode (+) and cathode (-) markings for correct electrical connection.

Пайдалану нұсқаулары

Once properly installed with a suitable constant current LED driver and heat sink, the CHANZON High Power LED Chip will illuminate when power is supplied. The chip is designed for continuous operation within its specified parameters.

  • Қуат қосулы: Apply power from the constant current LED driver to the connected LED chip.
  • Observe Light Output: The LED chip should emit natural white light (4000K-4500K).
  • Көзге тікелей әсер етуден аулақ болыңыз: Do not look directly into the illuminated LED chip for extended periods, as the high intensity light can cause eye strain or damage.
CHANZON 20W Natural White LED chip illuminated during testing

Image: An illuminated CHANZON 20W Natural White LED chip connected to power, demonstrating its light output.

Техникалық қызмет көрсету

The CHANZON High Power LED Chip is designed for long-term, low-maintenance operation. However, adherence to the following guidelines will help ensure its maximum lifespan:

  • Жылуды басқару: Regularly check that the heat sink is free from dust and debris to ensure efficient heat dissipation. Overheating is the primary cause of premature LED failure.
  • Тазалық: Keep the surface of the LED chip clean. Dust or dirt on the emitting surface can reduce light output and affect thermal performance. Use a soft, dry cloth for cleaning.
  • Қоршаған орта жағдайлары: Operate the LED chip within its specified environmental conditions (temperature, humidity).

Ақаулықтарды жою

МәселеЫқтимал себебіШешім
ЖШД жанбайдыIncorrect polarity; Faulty power supply; Loose connection; Damaged LED chip.Verify polarity (+/-); Check power supply output; Secure all connections; Replace LED chip if damaged.
LED is dim or flickersInsufficient current/voltage from driver; Overheating; Poor connection.Ensure driver matches LED specifications; Improve heat sink contact/airflow; Check connections.
LED overheats rapidlyInadequate heat sink; Poor thermal paste application; Excessive current.Install larger/more efficient heat sink; Reapply thermal paste; Verify current from driver is within specifications (600mA).
Қысқа өмір сүру ұзақтығыConsistent overheating; Over-current/over-voltage; Poor quality power supply.Ensure proper heat management (below 60°C); Use a stable constant current driver within specified voltage/ағымдық диапазондар.

Қолданбалар

The CHANZON High Power LED Chip is versatile and suitable for various lighting applications, including:

  • Жарықдиодты шамдар
  • Cast Lights
  • Прожекторлар
  • Stage Шамдар
  • Су астындағы Лamps
  • Проекция Л.amps
  • Өсімдіктерді өсіру шамдары
  • Ультракүлгін сәулемен емдеу Lamps (specific variants)
  • Mining Lamps
  • DIY Lighting Projects
Table of various LED chip colors and their specifications

Image: A table detailing various color options and their corresponding specifications for CHANZON LED chips, including warm white, natural white, red, blue, green, yellow, UV, and IR.

Өнім бейнелері

Review of LED Chip 20W from Chanzon

Бейне: егжей-тегжейлі шолуview of the CHANZON 20W LED chip, demonstrating its features, construction, and various color options. This video highlights the quality and versatility of the product.

Chanzon LED Chip 20W Bulb Lamp Beads DIY Lighting

Video: This video showcases the CHANZON 20W LED chip in action, demonstrating its brightness and suitability for DIY lighting projects. It provides a visual representation of the chip's performance.

Кепілдік және қолдау

Specific warranty information for this product is not provided in the available data. For warranty details, technical support, or further inquiries, please contact CHANZON directly through their official channels or the retailer where the product was purchased.

келуге болады CHANZON Store on Amazon қосымша ақпарат алу үшін.

© 2023 CHANZON. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.