Ohaus ST10C-A қалам өлшегішінің пайдалану нұсқаулығы

1. Кіріспе

The Ohaus ST10C-A Pen Meter is designed for simple, fast, and accurate measurement. This economical device offers reliable performance for various applications. Its durable construction and user-friendly features make it suitable for consistent use in diverse environments.

2. Өнім аяқталдыview

The ST10C-A Pen Meter is a compact, handheld device. Key features include a clear digital display, an intuitive on/off button, a protective sensor cap, and a wrist strap for secure handling.

1-сурет: Ohaus ST10C-A Pen Meter. This image shows the Ohaus ST10C-A Pen Meter. It features a digital display for pH readings, an 'On/Off' button, and a durable, waterproof design with red accents.

The meter's IP67 waterproof ABS housing ensures protection against dust and water ingress, making it suitable for wet conditions. An automatic shutdown feature helps conserve battery life.

3. Орнату

1. Қаптаманы ашу: Carefully remove the meter and all accessories from the packaging. Inspect for any damage.
2. Батареяны орнату: The meter typically comes with batteries pre-installed or requires simple installation. Refer to the battery compartment cover for instructions on opening and inserting batteries, ensuring correct polarity.
3. Sensor Preparation: Remove the protective sensor cap. If the sensor appears dry, condition it according to standard pH electrode practices (e.g., soaking in storage solution or pH 7 buffer for a short period).
4. Бастапқы калибрлеу: For optimal accuracy, perform an initial calibration using fresh pH buffer solutions (e.g., pH 4.01, 7.00, and 10.01). Follow the calibration procedure outlined in the meter's specific quick start guide or on-screen prompts.

4. Пайдалану нұсқаулары

1. Қуатты қосу/өшіру: түймесін басыңыз Қосу/Өшіру button located on the front of the meter to turn the device on or off.
2. Өлшем алу:
   • Ensure the sensor cap is removed.
   • Rinse the sensor with distilled water before and after each measurement.
   • Сенсорды s ішіне батырыңызample solution, ensuring the sensor tip is fully submerged.
   • Gently stir the solution to ensure homogeneity and allow the reading to stabilize.
   • Read the pH value displayed on the screen once it becomes stable.
3. Автоматты өшіру: The meter is equipped with an automatic shutdown feature to conserve battery life. It will power off after a period of inactivity.

5. Техникалық қызмет көрсету

• Сенсорды тазалау: After each use, rinse the sensor thoroughly with distilled or deionized water. Do not wipe the sensor bulb, as this can cause static charges and damage the sensitive glass.
• Сақтау орны: Always replace the protective sensor cap after use. Ensure the cap contains a small amount of storage solution (or pH 7 buffer) to keep the sensor hydrated. Never store the sensor dry or in distilled water.
• Батареяны ауыстыру: When the battery indicator appears on the display, replace the batteries promptly. Refer to the battery compartment for the correct battery type and installation procedure.
• Жалпы тазалау: The meter's housing can be cleaned with a damp мата. Қатты химиялық заттарды немесе абразивті тазартқыштарды қолданбаңыз.

6. Ақаулықтарды жою

7. Техникалық сипаттамалар

• Үлгі: ST10C-A
• Бренд: Охаус
• Тұрғын үй: IP67 waterproof ABS
• Ерекше өзгешеліктері: Protective sensor cap, automatic shutdown, wrist strap
• Өлшемдері: Approximately 15 x 10 x 4 inches (Product dimensions as listed, note this might be packaging size)
• Салмағы: Approximately 2 Pounds (Product weight as listed, might be shipping weight)

Note: Specific measurement ranges, accuracy, and resolution details should be confirmed with the official Ohaus product data sheet.

8. Кепілдік және қолдау

For detailed warranty information, technical support, or service inquiries, please refer to the official Ohaus website or contact your local Ohaus representative. Keep your purchase receipt for warranty claims.

Official Ohaus Webсайт: www.ohaus.com