Кіріспе
The SunSun JVP-110 wavemaker pump is designed to enhance water circulation in aquariums, preventing dead spots and promoting a healthier environment for aquatic life. Its submersible design and 360-degree rotation capability allow for versatile water movement, aiding in oxygenation and debris prevention. This manual provides essential information for the safe and effective setup, operation, and maintenance of your JVP-110 wavemaker pumps.
Өнім ерекшеліктері
- Convenient 2-pump pack for comprehensive water movement.
- 528 GPH (Gallons Per Hour) flow rate, suitable for both freshwater and marine aquariums.
- Fully submersible and oil-free motor to prevent contamination of the aquatic environment.
- 360-degree rotation for comprehensive water flow direction.
- Equipped with a suction cup and ball joints for versatile and secure positioning.
Пакет мазмұны
Барлық заттардың бар және зақымдалмағанына көз жеткізу үшін пакетті тексеріңіз:
- 2 x SunSun JVP-110 Wavemaker Pumps
- 2 x Suction Cups with Ball Joints
Image: SunSun JVP-110 Wavemaker Pump. This image shows the compact design of the pump and its suction cup mounting mechanism.
Орнату нұсқаулары
- Unpack the Pumps: Carefully remove the wavemaker pumps and all accessories from the packaging. Inspect for any visible damage.
- Орналастыруды таңдаңыз: Select a suitable location within your aquarium for the wavemaker. Consider areas where water circulation is poor or where debris tends to accumulate. The pump should be fully submerged.
- Сорғышты бекіту: Ensure the suction cup is clean. Press the suction cup firmly against the inner glass surface of the aquarium to secure the pump. The ball joint allows for angle adjustment.
- Бағытты реттеу: Rotate the pump head to direct the water flow as desired. The 360-degree rotation feature allows for precise targeting of water movement.
- Қуатты қосу: Ensure your hands are dry. Plug the power cord into a suitable electrical outlet. It is recommended to use a drip loop to prevent water from traveling along the cord to the outlet.
Қауіпсіздік ескертуі: Always ensure the pump is fully submerged before connecting to power. Never operate the pump dry. Disconnect power before performing any maintenance or adjustments.
Пайдалану нұсқаулары
Once properly installed and submerged, the SunSun JVP-110 wavemaker pumps operate continuously when plugged in. There are no external controls for speed or on/off functionality on the pump itself.
- Қуатты қосу/өшіру: To turn the pump on or off, simply plug or unplug the power cord from the electrical outlet.
- Ағынды реттеу: The direction of water flow can be adjusted by rotating the pump head on its ball joint. Experiment with different angles to achieve optimal water circulation in your aquarium.
- Таймерді пайдалану: For intermittent operation, you may connect the pump to an external aquarium timer (not included).
Техникалық қызмет көрсету
Regular maintenance ensures the longevity and efficient operation of your wavemaker pumps.
- Қуатты ажырату: Кез келген техникалық қызмет көрсетуді жүргізбес бұрын сорғыны әрқашан розеткадан ажыратыңыз.
- Аквариумнан алып тастаңыз: Сорғыны аквариум әйнегінен абайлап ажыратыңыз.
- Таза дөңгелек: The impeller is the rotating part inside the pump. Gently twist and pull the front cover to access the impeller. Remove any debris, algae, or calcium buildup from the impeller and its housing using a soft brush or cotton swab.
- Таза сорғыш: Clean the suction cup and the area of the aquarium glass where it attaches to ensure a secure hold.
- Қайта жинау: Carefully reassemble the pump, ensuring all parts fit correctly.
- Қайта орнату: Reinstall the pump in the aquarium and plug it back in.
Жиілік: It is recommended to clean the wavemaker pumps at least once a month, or more frequently if you notice reduced flow or increased noise.
Ақаулықтарды жою
| Мәселе | Ықтимал себебі | Шешім |
|---|---|---|
| Pump does not start or stops working. |
|
|
| Су ағынының төмендеуі. |
|
|
| Шамадан тыс шу немесе діріл. |
|
|
| Pump runs in reverse (as noted in some reviewс). |
|
|
Техникалық сипаттамалар
| Үлгі нөмірі | JVP-1102pk |
| Бренд | КүнСан |
| Ағын жылдамдығы | 528 GPH (Gallons Per Hour) / 8.8 GPM (Gallons Per Minute) |
| Тtage | 220 вольт |
| Қуат көзі | Электр сымы |
| Өлшемдері (L x W x H) | 15.24 x 5.08 x 7.62 см (6 x 2 x 3 дюйм) |
| Салмағы | 412.77 г (0.91 фунт) |
| Материал | Пластикалық, электронды компоненттер |
| Арнайы пайдалану | Aquarium water circulation, indoor use only |
| Қосылған құрамдас бөліктер | Pump, Suction Cup |
Кепілдік және қолдау
Specific warranty details for the SunSun JVP-110 Wavemaker Pumps are not provided in this manual. For warranty information, technical support, or replacement parts, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.
Manufacturer: SunSun