Кіріспе
This manual provides instructions for the proper installation, operation, and maintenance of the Hager 2500 Series Cylindrical Passage Lock, model 129002. This lock is designed for standard duty commercial applications and is suitable for doors requiring a non-locking function, allowing free passage from either side at all times.
Қауіпсіздік туралы ақпарат
Always wear appropriate safety gear, such as gloves and eye protection, during installation. Ensure all tools are in good working condition. If you are unsure about any step, consult a qualified professional.
Пакет мазмұны
Орнатуды бастамас бұрын барлық компоненттердің бар екенін тексеріңіз:
- Hager 2500 Series Cylindrical Passage Lock assembly (Withnell Lever Style)
- Бекіту механизмі
- Strike plate (ASA Strike)
- Монтаждау бұрандалары
- Operating keys (two supplied, for specific internal components, not for locking function)
- Installation template (if included with physical product)
Орнату және орнату
Follow these steps for proper installation of the Hager 2500 Series Cylindrical Passage Lock.
1. Есікті дайындау
Ensure your door is prepared with the following standard dimensions:
- Айқас тесігі: 2-1/8 inches (54 mm) diameter
- Edge Bore (Latch Hole): 1 inch (25 mm) diameter
- Бэксет: 2-3/4 дюйм (70 мм)
Use the provided template (if applicable) to mark and drill holes accurately. Incorrect drilling can affect lock function and security.
2. Install Latch Mechanism
- Insert the latch mechanism into the edge bore of the door, ensuring the bevel of the latch bolt faces the door frame.
- Берілген бұрандалармен бекіткішті бекітіңіз.
3. Install Lock Chassis
- Align the lock chassis with the cross bore, ensuring the spindle engages with the latch mechanism.
- Insert the exterior and interior lever assemblies.
- Secure the lock chassis with the through-bolts or mounting screws. The design features no exposed mounting screws for a clean appearance.
4. Install Strike Plate
- Mark the position for the ASA strike plate on the door frame, aligning it with the latch bolt.
- Chisel out the mortise for the strike plate to sit flush with the door frame.
- Secure the strike plate with the provided screws.
Image 1: Hager 2500 Series Cylindrical Passage Lock, Withnell Lever Style, in Satin Chrome finish. This image shows the complete lever set, including both interior and exterior levers and the cylindrical chassis.
Пайдалану нұсқаулары
The Hager 2500 Series Cylindrical Passage Lock is designed for non-locking applications. It allows free entry and exit at all times.
- To open the door, simply depress the lever handle on either side.
- Release the lever to allow the latch bolt to extend and secure the door in the closed position.
Ескерту: While two operating keys are supplied, these are typically for internal component access or specific installation adjustments, not for a locking function on a passage set. This lock does not provide security locking.
Техникалық қызмет көрсету
Regular maintenance ensures the longevity and smooth operation of your lock.
- Тазалау: Сыртқы беттерді жұмсақ шүберекпен тазалаңыз, damp мата. Аяқтауға зақым келтіруі мүмкін абразивті тазартқыштардан немесе еріткіштерден аулақ болыңыз.
- Майлау: Periodically apply a small amount of graphite-based lubricant to the latch bolt mechanism if it becomes stiff. Do not use oil-based lubricants, as they can attract dust and debris.
- Тексеру: Annually inspect all screws and components for tightness. Tighten any loose screws to prevent excessive wear.
Ақаулықтарды жою
| Мәселе | Ықтимал себебі | Шешім |
|---|---|---|
| Тұтқа қатты немесе бұру қиын. | Ластанудың жиналуы немесе майлаудың болмауы. | Clean the mechanism and apply graphite lubricant. |
| Бекіткіш болт толық жиналмайды. | Misalignment of lock components or strike plate. | Check alignment of lock chassis and strike plate. Ensure screws are tight. |
| Door rattles when closed. | Strike plate not properly aligned or mortised. | Adjust the strike plate position or depth to ensure a snug fit with the latch bolt. |
Техникалық сипаттамалар
| Ерекшелік | Мәлімет |
|---|---|
| Үлгі нөмірі | 129002 |
| Сериялар | 2500 сериясы |
| Құлып түрі | Cylindrical Passage Lock (Non-locking) |
| Материал | Heavy Gauge Steel, Zinc (Handle Material: Zinc) |
| Аяқтау | Сатин Chrome |
| Рычаг стилі | Withnell |
| Бэксет | 2-3/4 дюйм (70 мм) |
| Door Prep - Cross Bore | 2-1/8 inches (54 mm) diameter |
| Door Prep - Latch Hole (Edge Bore) | 1 inch (25 mm) diameter |
| Қолды бағдарлау | Қолмен емес |
| Баға | Grade 2 (Standard Duty Commercial) |
| Стрейк плитасы | ASA Strike |
| Қосылған құрамдас бөліктер | 2510 WTN US26D (Lock assembly, latch, strike, screws, 2 operating keys) |
Кепілдік туралы ақпарат
Hager products are manufactured to high standards. For specific warranty terms and conditions applicable to the 2500 Series Cylindrical Passage Lock, please refer to the official Hager website or contact Hager customer support directly. Keep your purchase receipt as proof of purchase.
Тұтынушыларды қолдау
If you require further assistance or have questions regarding your Hager 2500 Series Cylindrical Passage Lock, please contact Hager customer support:
- Webсайт: Visit the official Hager webқолдау ресурстары мен байланыс ақпаратына арналған сайт.
- Байланыс: Refer to the packaging or Hager's webтелефон нөмірлері немесе электрондық пошта мекенжайлары үшін сайт.
When contacting support, please have your model number (129002) and purchase details available.