DIG ECO1ASV.075 Ambient Light Powered Irrigation Controller User Manual

Кіріспе

The DIG ECO1ASV.075 is an innovative single-station irrigation controller designed for efficient water management. This unit is powered entirely by ambient light (solar energy), eliminating the need for batteries or external AC power. It comes pre-mounted on a 3/4-inch anti-siphon valve, making it suitable for both drip irrigation and sprinkler systems. The integrated anti-siphon valve includes flow control and internal/external bleed features, crucial for protecting your household water supply from contamination. Its patented photovoltaic module and microelectronic energy management system ensure reliable operation in various light conditions, providing continuous power to the controller.

Негізгі мүмкіндіктер

• Ambient Light Powered: Operates solely on solar energy, requiring no backup batteries or AC power.
• Әмбебап қолданба: Compatible with both drip irrigation and sprinkler systems.
• Integrated Anti-Siphon Valve: Features a 3/4-inch anti-siphon valve with flow control for water supply protection.
• Пайдаланушыға ыңғайлы интерфейс: Equipped with seven buttons and an integrated LCD for easy programming.
• Икемді бағдарламалау: Allows for programmable run times from 1 minute up to 5 hours and 59 minutes.
• Экологиялық тұрақтылық: Utilizes clean, renewable solar energy for eco-friendly operation.

Өнімнің құрамдас бөліктері

The DIG ECO1ASV.075 controller and valve assembly consists of the following main parts:

• Басқару блогы: The top grey housing containing the solar panel, LCD screen, and control buttons.
• Anti-Siphon Valve: The black valve body with 3/4-inch inlet and outlet connections, designed to prevent backflow.
• Ағынды басқару тұтқасы: Located on the valve, used to adjust water flow.
• Соленоид: The component that opens and closes the valve, connected to the controller.

1-сурет: аяқталдыview of the DIG ECO1ASV.075 Ambient Light Powered Controller with 3/4" Anti-Siphon Valve. This image displays the complete unit, showing the grey controller unit mounted atop the black anti-siphon valve. The solar panel is visible on the controller's top surface.

Image 2: Close-up of the DIG ECO1ASV.075 Controller's user interface. The protective cover is open, revealing the LCD screen and the seven control buttons. A small diagram on the inside of the cover provides quick reference for button functions.

Орнату және орнату

Proper installation is crucial for the optimal performance and longevity of your ECO1ASV.075 controller. Ensure all connections are secure and watertight.

1. Сайтты дайындаңыз: Choose a location that receives adequate ambient light throughout the day for the solar panel. The valve should be installed above the highest sprinkler head or emitter in the zone to ensure proper anti-siphon function.
2. Сумен жабдықтауға қосылу:
   • Identify the inlet (upstream) and outlet (downstream) ports on the anti-siphon valve. Arrows on the valve body typically indicate flow direction.
   • Connect the inlet side of the valve to your main water supply line (e.g., garden hose, PVC pipe).
   • Connect the outlet side of the valve to your irrigation system (drip line or sprinkler manifold).
   • Use appropriate thread sealant (e.g., PTFE tape) on all threaded connections to prevent leaks.
3. Құрылғыны бекітіңіз: While the valve provides a stable base, ensure the entire assembly is securely positioned to prevent accidental damage or dislodgement.
4. Бастапқы төлем: Allow the unit to sit in ambient light for at least 2-3 hours before initial programming to ensure the internal energy management system is sufficiently charged.
5. Ағып кетуге арналған сынақ: Slowly turn on the main water supply and check all connections for leaks. Tighten as necessary.

Пайдалану нұсқаулары

The ECO1ASV.075 controller features a simple interface for programming your irrigation schedule.

Контроллер интерфейсі

The controller has an LCD screen and seven buttons:

• СКД дисплей: Shows current time, program settings, and status.
• Түймелері: Used for navigation, setting values, and manual operation. Refer to Image 2 for button layout.

Кестеңізді бағдарламалау

Follow these steps to set up your watering program:

1. Activate Screen: Touch any button to activate the LCD screen if it is off.
2. Ағымдағы уақытты орнату: Navigate to the time setting mode (consult the quick guide on the controller's cover or full manual for specific button presses) and set the current time.
3. Суарудың басталу уақытын орнату: Choose the desired time for your irrigation cycle to begin.
4. Set Run Time: Program the duration of each watering cycle. The controller allows run times from 1 minute up to 5 hours and 59 minutes, adjustable in 1-minute increments.
5. Суару жиілігін орнатыңыз: Select how often the irrigation cycle should repeat (e.g., daily, every other day, specific days of the week).
6. Параметрлерді сақтау: Ensure all settings are saved before exiting the programming mode.

Қолмен жұмыс

To manually turn the water on or off, or to initiate a manual watering cycle:

• Locate the manual operation button (often indicated by a water drop or 'ON/OFF' symbol).
• Press the button to cycle through manual options (e.g., manual ON, manual OFF, manual cycle).
• Confirm your selection. The valve will open or close accordingly.

Техникалық қызмет көрсету

Regular maintenance ensures the longevity and efficient operation of your DIG ECO1ASV.075 controller.

• Күн панелін тазалау: Periodically wipe the solar panel on top of the controller with a soft, damp cloth to remove dust, dirt, or debris. A clean panel ensures maximum light absorption and power generation.
• Valve Inspection: Annually inspect the anti-siphon valve for any signs of wear, cracks, or leaks.
• Қыстауға дайындық (бар болса): In regions with freezing temperatures, disconnect the unit from the water supply and drain all water from the valve and irrigation lines to prevent freeze damage. Store the controller in a protected, non-freezing environment.
• Қоқыстарды жою: Ensure no debris obstructs the valve's internal components or the anti-siphon mechanism.

Ақаулықтарды жою

If you encounter issues with your ECO1ASV.075 controller, refer to the following common problems and solutions:

Техникалық сипаттамалар

Кепілдік және қолдау

DIG products are manufactured to high quality standards. For specific warranty information and terms, please refer to the documentation included with your purchase or visit the official DIG website. For technical support, troubleshooting assistance beyond this manual, or replacement parts, please contact DIG customer service.

Please note: This manual provides general guidance. Always refer to the latest information and specific instructions provided by the manufacturer.