DECA CB5000

DECA CB5000 Class Booster 5000E 12/24V Battery Charger and Starter User Manual

1. Кіріспе

This manual provides essential instructions for the safe and effective operation, setup, and maintenance of your DECA CB5000 Class Booster 5000E battery charger and starter. Please read this manual thoroughly before using the device to ensure proper function and prevent injury or damage.

2. Қауіпсіздік туралы ақпарат

WARNING: Failure to follow these safety instructions may result in electric shock, fire, serious injury, or property damage.

  • Always wear appropriate personal protective equipment, including eye protection and gloves, when working with batteries.
  • Ensure the work area is well-ventilated to disperse explosive gases produced by batteries during charging.
  • Never smoke or allow sparks or flames near the battery or charger.
  • Connect and disconnect battery clamps only when the charger is switched off and unplugged from the mains power.
  • Avoid touching uninsulated parts of the output connectors or battery terminals.
  • Зарядтағышты жаңбырға немесе шамадан тыс ылғалға ұшыратпаңыз.
  • Keep children and unauthorized persons away from the charger and battery during operation.
  • Қуат сымы зақымдалған болса, қауіпті болдырмау үшін оны өндіруші, оның қызмет көрсету агенті немесе соған ұқсас біліктілігі бар адамдар ауыстыруы керек.

3. Өнім аяқталдыview

The DECA CB5000 Class Booster 5000E is a robust, wheeled battery charger and starter designed for 12V and 24V lead-acid batteries. It features multiple charging positions and a powerful starting current for various vehicle types.

DECA CB5000 Class Booster 5000E front view

1-сурет: Алдыңғы view of the DECA CB5000 Class Booster 5000E, showing its yellow casing, басқару панелі және тасымалдауға ыңғайлы болу үшін дөңгелектер.

DECA CB5000 Class Booster 5000E control panel close-up

Figure 2: Close-up of the control panel, displaying the analog ammeter, voltage selector (12V/24V), and charging current adjustment knobs.

4. Орнату

  1. Қаптаманы ашу: Carefully remove the charger from its packaging. Inspect for any signs of damage during transit.
  2. Ассамблея: Attach the wheels and handle (if not pre-assembled) according to the diagrams provided in the separate assembly guide. Ensure all fasteners are securely tightened.
  3. Орналастыру: Position the charger on a stable, level surface in a well-ventilated area, away from direct sunlight, heat sources, and flammable materials.
  4. Қуат қосылымы: Ensure the charger's main switch is in the 'OFF' position. Connect the power cord to a grounded 230V AC 50-60Hz electrical outlet.

5. Пайдалану нұсқаулары

5.1. Батареяны зарядтау

  1. Батареяны дайындаңыз: Ensure the battery terminals are clean and free of corrosion. If the battery has removable caps, check the electrolyte level and top up with distilled water if necessary.
  2. Батареяға қосу: With the charger switched OFF and unplugged, connect the RED (+) positive clamp to the positive (+) battery terminal. Connect the BLACK (-) negative clamp to the negative (-) battery terminal. For batteries installed in a vehicle, connect the negative clamp to the vehicle chassis away from the battery and fuel line.
  3. Томды таңдаңызtage: Томды орнатыңызtage selector switch on the charger to match the battery voltage (12 В немесе 24 В).
  4. Select Charging Current: Adjust the charging current knob to the desired charging position (e.g., 'Min' for slow charge, 'Max' for fast charge, or an intermediate position). Refer to your battery's specifications for recommended charging rates.
  5. Зарядтауды бастау: Plug the charger into the mains power outlet and switch the charger ON. The ammeter will indicate the charging current.
  6. Монитор: Periodically check the ammeter. As the battery charges, the current will gradually decrease. Charging is complete when the ammeter reads near zero or stabilizes at a very low current.
  7. Ажырату: Switch the charger OFF and unplug it from the mains. Then, disconnect the negative (-) clamp, одан кейін оң (+) clamp.

5.2. Engine Starting (Booster Function)

CAUTION: Do not attempt to start an engine if the battery is frozen or severely damaged.

  1. Көлікті дайындау: Ensure the vehicle's ignition is OFF and all accessories are turned off.
  2. Батареяға қосу: With the charger switched OFF and unplugged, connect the RED (+) positive clamp to the positive (+) battery terminal. Connect the BLACK (-) negative clamp to the vehicle chassis, away from the battery and fuel line.
  3. Томды таңдаңызtage: Томды орнатыңызtage selector switch on the charger to match the vehicle's battery voltage (12 В немесе 24 В).
  4. Select Starting Current: Set the charging current knob to the 'Max' or 'Booster' position.
  5. Қозғалтқышты іске қосу: Plug the charger into the mains power outlet and switch the charger ON. Wait approximately 60-120 seconds for the battery to receive a preliminary charge. Then, attempt to start the engine for no more than 5 seconds. If the engine does not start, wait at least 60 seconds before trying again. Do not exceed three starting attempts.
  6. Ажырату: Once the engine starts, switch the charger OFF and unplug it from the mains. Then, disconnect the negative (-) clamp, одан кейін оң (+) clamp.

6. Техникалық қызмет көрсету

  • Тазалау: Disconnect the charger from the mains before cleaning. Wipe the exterior with a soft, dry cloth. Do not use solvents or abrasive cleaners.
  • Кабельді тексеру: Regularly inspect the power cord and battery cables for any signs of damage, cuts, or fraying. Replace damaged cables immediately through authorized service personnel.
  • Сақтау орны: Store the charger in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure cables are neatly coiled and not kinked.

7. Ақаулықтарды жою

МәселеЫқтимал себебіШешім
Зарядтағыш қосылмайдыNo power from outlet; Main switch off; Internal fuse blownCheck power outlet; Ensure main switch is ON; Contact service for fuse replacement.
No charging current indicatedIncorrect battery connection; Battery fully charged; Voltage selector incorrectVerify correct polarity; Battery may be full; Check voltage selector (12V/24V).
Engine does not start in booster modeBattery too discharged/damaged; Incorrect connections; Engine issueAllow more pre-charge time; Check all connections; Consult vehicle mechanic.

If troubleshooting steps do not resolve the issue, please contact DECA customer support or an authorized service center.

8. Техникалық сипаттамалар

ЕрекшелікТехникалық сипаттама
ҮлгіCB5000
Кіріс көлеміtage (айнымалы ток)1ph x 230V, 50-60Hz
Қуат (кВт)2.3/11
Зарядтау көлеміtage (тұрақты ток)12В / 24В
Average Charging Current70 А
Effective Charging Current105 А
Зарядтау позициялары4
Starting Current (0V CC)700 А
Starting Current (1V)460 А
Nominal Reference Capacity (Ah 15h Min/Max)35 / 800 Ah
Өлшемдері (L x W x H)47 x 32 x 75 см
Салмағы28 кг
СертификаттауCE
Құрамдас бөліктерБір зарядтағыш

9. Кепілдік және қолдау

For warranty information, please refer to the warranty card included with your product or contact your retailer. For technical support, spare parts, or service inquiries, please contact DECA customer service or an authorized DECA service center. Keep your purchase receipt as proof of purchase.

Қатысты құжаттар - CB5000

Алдын алаview Start Booster 12V - 24V - 12/24V Пайдаланушы нұсқаулығы | Лемания энергиясы
Lemania Energy Start Booster (12V, 24V, 12/24V) үшін толық пайдаланушы нұсқаулығы. Қауіпсіздік нұсқауларын, пайдалану процедураларын, мүмкіндіктерді, техникалық қызмет көрсетуді және кәсіби іске қосуға арналған жиі қойылатын сұрақтарды қамтиды.
Алдын алаview FERVE F-2124 BOOSTER PRO 12-24V Technical Specifications
Technical specifications and features for the FERVE F-2124 BOOSTER PRO 12-24V, a professional-grade battery booster with internal AGM batteries, surge protection, and automatic charging.
Алдын алаview NOCO Genius BOOSTMAX GB500 Jump Starter User Guide & Warranty
Comprehensive user guide and warranty information for the NOCO Genius BOOSTMAX GB500 portable lithium-ion jump starter. Includes safety warnings, operating instructions, troubleshooting, technical specifications, and warranty details.
Алдын алаview NOCO Boost X GBX75 Portable Jump Starter User Guide & Warranty
Discover the NOCO Boost X GBX75, a 2500A 12V portable lithium jump starter and USB-C power bank. This guide provides essential safety information, operating instructions for jump starting vehicles, charging devices, troubleshooting, and warranty details from NOCO.
Алдын алаview GYS Startronic Hybrid 950 Jump Starter User Manual
Official user manual for the GYS Startronic Hybrid 950 battery-less jump starter. Includes safety instructions, operating modes, and maintenance guidelines for 12V vehicles.
Алдын алаview TOPDON V4000 HD Heavy Duty Jump Starter User Manual - Jump Start and Power Your Vehicle
Comprehensive user manual for the TOPDON V4000 HD Heavy Duty Jump Starter. Learn how to jump start 12V/24V vehicles, use its LED flashlight, and function as a portable power bank.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.