OSD Audio IWS8

OSD Audio IWS8 8-inch In-Wall Subwoofer Instruction Manual

Model: IWS8 | Brand: OSD Audio

1. Кіріспе

The OSD Audio IWS8 is an 8-inch in-wall passive subwoofer designed to integrate seamlessly into your home audio system. This unit is engineered to deliver enhanced low-frequency sound, complementing your existing speakers for a richer audio experience. Its discreet design features a paintable grille, allowing it to blend with your room's aesthetics. As a passive subwoofer, it requires an external ampжұмыс істеуге арналған көтергіш.

Please read this manual thoroughly before installation and use to ensure proper setup and optimal performance.

2. Пакет мазмұны

Барлық компоненттер пакетте бар екеніне көз жеткізіңіз:

  • OSD Audio IWS8 8-inch In-Wall Subwoofer
  • Dog-ear mount system (pre-installed)
  • Integrated rear dust cover (pre-installed)
  • Paintable grille

3. Негізгі мүмкіндіктер

  • Қуатты өңдеу: 150 Watts maximum output.
  • Жүргізуші: 8-inch polypropylene subwoofer with butyl rubber surround for durability and performance.
  • Дизайн: Профfile in-wall design for discreet integration.
  • Орнату: Easy-install dog-ear bracket system for secure mounting to drywall.
  • Қорғау: Integrated rear dust shield to protect components and improve sound quality.
  • Эстетика: Paintable frame and grille to match room decor.
  • Үйлесімділік: Passive design requires an external subwoofer amplifier (e.g., OSD Audio SMP200).

4. Орнату және орнату

Proper installation is crucial for optimal performance and safety. If you are unsure about any steps, consult a qualified installer.

4.1 Орнатуды жоспарлау

  • Орналасқан жері: Choose a wall location free of studs, electrical wires, plumbing, or other obstructions. Use a stud finder to locate studs.
  • Сымдар: Plan your speaker wire routing from the subwoofer amplifier to the subwoofer location. Ensure you use appropriate gauge speaker wire for the distance.

4.2 Қажетті құралдар

  • Саңырауқұлақ іздеуші
  • Өлшеу лентасы
  • Қарындаш
  • Drywall saw or utility knife
  • Сым аралық
  • Бұрауыш (Филипс басы)
  • Деңгей

4.3 Cutting the Wall Opening

  1. Carefully measure and mark the desired location on the wall. The cutout dimensions for the IWS8 are approximately 10.5 inches (H) x 10.5 inches (W).
  2. Use a level to ensure your markings are straight.
  3. Using a drywall saw or utility knife, carefully cut along the marked lines.
OSD Audio IWS8 In-Wall Subwoofer with dimensions

Image: The OSD Audio IWS8 in-wall subwoofer shown with its dimensions, indicating a height of 12 inches, width of 11.5 inches, and depth of 6 inches.

4.4 Wiring the Subwoofer

  1. Pull the speaker wire through the wall opening.
  2. Strip approximately 1/2 inch of insulation from the ends of the speaker wire.
  3. Connect the positive (+) terminal of the speaker wire to the red (+) terminal on the subwoofer.
  4. Connect the negative (-) terminal of the speaker wire to the black (-) terminal on the subwoofer. Ensure a secure connection.
Артқы view of OSD Audio IWS8 subwoofer showing wiring terminals

Сурет: Артқы жағы view of the OSD Audio IWS8 in-wall subwoofer, highlighting the speaker wire terminals and the dog-ear mounting clamps.

4.5 Сабвуферді орнату

  1. Carefully insert the subwoofer into the wall opening.
  2. Tighten the screws on the front baffle of the subwoofer. This will activate the dog-ear clamps, rotating them outwards to grip the drywall securely.
  3. Do not overtighten the screws, as this can damage the drywall or the subwoofer frame. Tighten until the subwoofer is snug and flush with the wall surface.
Жоғарғы view of OSD Audio IWS8 subwoofer showing dog-ear clamps

Сурет: жоғарыдан төменге view of the OSD Audio IWS8 in-wall subwoofer, illustrating the dog-ear mounting clamps in their extended position, ready to secure the unit to a wall.

4.6 Торды орнату

  1. Once the subwoofer is securely mounted, align the paintable grille with the subwoofer frame.
  2. The grille is designed to fit snugly. Gently press it into place until it is flush with the wall.
  3. If desired, the grille can be painted to match your wall color before installation. Ensure paint does not clog the perforations.
Жарылған view of OSD Audio IWS8 in-wall subwoofer and grille

Сурет: жарылған view of the OSD Audio IWS8 in-wall subwoofer, showing the main speaker unit and its separate paintable grille, ready for installation.

5. Операция

5.1 Ampқұтқарушы

The IWS8 is a passive subwoofer and requires an external subwoofer amplifier. OSD Audio recommends using an amplifier such as the SMP200, a 200-watt Class D subwoofer amplifier with an advanced crossover circuit. Connect the speaker output terminals of your subwoofer amplifier to the input terminals of the IWS8, ensuring correct polarity (+ to + and - to -).

5.2 Initial Power-Up and Adjustment

  1. Құрылғыны қосар алдында барлық қосылымдардың қауіпсіз екеніне көз жеткізіңіз ampкөтергіш және дыбыс көзі.
  2. Start with the volume level on your subwoofer amplifier set to a low position.
  3. Play audio through your system. Gradually increase the amplifier's volume until the desired bass level is achieved.
  4. Adjust the crossover frequency and phase settings on your subwoofer amplifier to blend the subwoofer's output smoothly with your main speakers. Refer to your amplifier's manual for specific instructions on these adjustments.

6. Техникалық қызмет көрсету

The OSD Audio IWS8 subwoofer requires minimal maintenance.

  • Тазалау: Periodically wipe the grille and frame with a soft, dry cloth to remove dust. Do not use harsh chemicals or abrasive cleaners.
  • Тексеру: Occasionally check the mounting screws to ensure they remain tight and the subwoofer is securely seated in the wall.

7. Ақаулықтарды жою

If you encounter issues with your IWS8 subwoofer, refer to the following common troubleshooting steps:

МәселеЫқтимал себебіШешім
Сабвуферден дыбыс жоқ
  • Сабвуфер amplifier is off or unplugged.
  • Дұрыс емес сым қосылымдары.
  • Amplifier input source not selected or muted.
  • Ақаулы динамик сымы.
  • Қамтамасыз ету amplifier is powered on and connected.
  • Барлық динамик сымдарының қосылымдарының дұрыс және қауіпсіз екеніне көз жеткізіңіз.
  • Тексеру amplifier settings for correct input and unmute.
  • Test with a known good speaker wire.
Бұрмаланған немесе анық емес дыбыс
  • Amplifier volume too high.
  • Дұрыс емес amplifier settings (e.g., crossover).
  • Бос динамик сым қосылымдары.
  • Азайту ampкөтергіш көлемі.
  • Adjust crossover frequency and phase on the ampқұтқарушы.
  • Барлық динамик сым қосылымдарын тексеріңіз және бекітіңіз.
Әлсіз немесе жеткіліксіз басс
  • Ampкөтергіштің көлемі тым төмен.
  • Дұрыс емес кроссовер жиілігінің параметрі.
  • Phase setting mismatch.
  • Сабвуферді орналастыру.
  • Арттыру ampкөтергіш көлемі.
  • Adjust crossover frequency on the amplifier to a lower setting.
  • Experiment with the phase control on the ampқұтқарушы.
  • Consider repositioning if possible, or adjusting room acoustics.
Vibration from the wall or grille
  • Subwoofer not securely mounted.
  • Grille not properly seated.
  • Wall cavity resonance.
  • Ensure dog-ear clamps are fully tightened and the subwoofer is flush.
  • Press the grille firmly into place.
  • Consider adding acoustic dampening material within the wall cavity if accessible.

8. Техникалық сипаттамалар

Техникалық сипаттамаМән
БрендOSD аудио
Үлгі нөміріСӨЖ8
Динамик түріҚабырғадағы сабвуфер
Вуфердің диаметрі8 дюйм
Динамиктің максималды шығыс қуаты150 Вт
Жиілік реакциясы40 Hz (Lower limit, actual range depends on amplifier and room)
Кедергі8 Ом
Монтаждау түріҚабырғадағы
Қоршау материалыПолипропилен
Элемент өлшемдері (D x W x H)11.5"D x 12"W x 6"H (жалпы)
Cutout Dimensions (Approx.)10.5" x 10.5"
Қосылу технологиясыКөмекші (сымды)
Кірістірілген медиаSubwoofer, dog ear mount system, integrated rear dust cover

9. Кепілдік туралы ақпарат

The OSD Audio IWS8 In-Wall Subwoofer is covered by a 10 жылдық кепілдік from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the OSD Audio webсайт.

10. Тұтынушыларға қолдау көрсету

For further assistance, technical support, or warranty inquiries, please contact OSD Audio customer service. You can find contact information and additional resources by visiting the official OSD Audio webсайт:

www.osdaudio.com

© 2024 OSD Audio. Барлық құқықтар қорғалған.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.