Әмбебап 24097

Universal 24097 T5 Fluorescent Ballast User Manual

Model: B228PUNV115-D001C (24097)

1. Кіріспе

This manual provides instructions for the installation, operation, and maintenance of the Universal 24097 T5 Fluorescent Ballast, model B228PUNV115-D001C. This ballast is designed to operate two F28T5 fluorescent lamps with a programmed rapid start method, compatible with 120/277 volt electrical systems. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.

2. Қауіпсіздік туралы ақпарат

WARNING: Risk of electric shock. Disconnect power before installation or servicing.

  • Орнатуды білікті электрик ұлттық және жергілікті электр ережелеріне сәйкес орындауы керек.
  • Кіріс көлемін қамтамасыз етіңізtage matches the ballast's rated voltage (120/277 В).
  • Сымдар зақымдалған немесе зақымдалған балласты пайдаланбаңызasing бұзылған.
  • This device is not intended for use with dimmers unless specifically rated for dimming applications.
  • Судан аулақ ұстаңыз және damp орталар.

3. Орнату және орнату

The Universal 24097 ballast is designed for easy integration into fluorescent lighting fixtures. Follow these steps for proper installation:

  1. Қуатты ажырату: Before beginning any work, ensure the main power supply to the fixture is turned off at the circuit breaker. Verify with a voltagэлектронды тексеруші.
  2. Remove Old Ballast (if applicable): Carefully disconnect and remove the existing ballast from the fixture. Note the wiring configuration.
  3. Mount New Ballast: Securely mount the Universal 24097 ballast inside the fixture using appropriate screws or mounting hardware. Ensure it is firmly in place to prevent vibration.
  4. Сымды қосылымдар:

    Refer to the wiring diagram provided on the ballast label for correct connections. Typically, this involves:

    • қосу қара wire to the 120V or 277V (line) input.
    • қосу ақ wire to the neutral input.
    • қосу қызыл және көк wires to the lamp sockets as indicated for the two F28T5 lamps.
    • Барлық қосылымдардың сенімді және сым гайкаларымен оқшауланғанына көз жеткізіңіз.
    Universal 24097 Fluorescent Ballast with wiring diagram

    Figure 1: Universal 24097 Fluorescent Ballast. This image shows the ballast unit, typically with a wiring diagram label visible on its surface, indicating connection points for power input and lamp шығыстар.

  5. L орнатыңызamps: Insert the two F28T5 fluorescent lamps into their respective sockets.
  6. Қуатты қалпына келтіру: Once all connections are secure and lamps are installed, restore power at the circuit breaker.

4. Пайдалану нұсқаулары

The Universal 24097 ballast operates automatically once power is supplied. It utilizes a programmed rapid start method, which provides a brief preheat to the lamp cathodes before ignition, extending lamp life and ensuring flicker-free starting.

  • Upon power-up, the ballast will initiate the lamps.
  • Егер лamps do not light, ensure they are properly seated and power is supplied.
  • This ballast is designed for continuous operation within its specified temperature range.

5. Техникалық қызмет көрсету

The Universal 24097 ballast is designed for long-term, maintenance-free operation. However, periodic checks of the lighting fixture are recommended.

  • Тазалау: Ensure the ballast and fixture remain free of dust and debris to prevent overheating. Disconnect power before cleaning.
  • Lamp Ауыстыру: L ауыстырған кездеamps, always disconnect power first. Replace both lamps simultaneously for optimal performance and ballast life. Use only F28T5 lamps.
  • Сымдарды тексеру: Periodically inspect wiring for any signs of wear, fraying, or loose connections. Address any issues immediately after disconnecting power.

6. Ақаулықтарды жою

If you encounter issues with your Universal 24097 ballast, refer to the following troubleshooting guide:

МәселеЫқтимал себебіШешім
Lampжанбайды.
  • Бекітуге күш жоқ.
  • Бос сым қосылымдары.
  • Ақаулы лamps.
  • Ақаулы балласт.
  • Ажыратқышты және қабырға қосқышын тексеріңіз.
  • Verify all wiring connections are secure (power off).
  • l ауыстырыңызamps with new F28T5 lamps.
  • Егер лamps are new and wiring is correct, replace ballast.
Lamps flicker or hum.
  • Дұрыс емес lamp түрі.
  • Бос lamp байланыстар.
  • Қартаю lamps.
  • Ballast nearing end of life.
  • Ensure F28T5 lampлар қолданылады.
  • Reseat lamps firmly in sockets.
  • l ауыстырыңызamps.
  • Consider replacing ballast.
Ballast is hot to the touch.
  • Normal operating temperature.
  • Нашар желдету.
  • Шамадан тыс жүктелген тізбек.
  • Some heat is normal.
  • Ensure fixture has adequate airflow.
  • Consult an electrician if overheating persists or is excessive.

7. Техникалық сипаттамалар

  • Үлгі: B228PUNV115-D001C (24097)
  • Бренд: Әмбебап
  • Lamp Түрі: F28T5 Fluorescent
  • L саныamps: 2
  • Кіріс көлеміtage: 120 / 277В айнымалы ток
  • Бастау әдісі: Programmed Rapid Start
  • Өндіруші бөлік нөмірі: 24097
  • ASIN: B0070FFQG6
  • Бірінші қол жетімді күн: 22 жылдың 2012 қаңтары

8. Кепілдік және қолдау

For warranty information and technical support, please refer to the official Universal Lighting Technologies webсайтына өтіңіз немесе тұтынушыларға қызмет көрсету бөліміне хабарласыңыз. Кепілдік шағымдары үшін сатып алу түбіртегін сақтаңыз.

Өндіруші: Әмбебап жарықтандыру технологиялары

Бөлім нөмірі: 24097

ASIN: B0070FFQG6

© 2023 Universal Lighting Technologies. All rights reserved.

Бұл нұсқаулықтағы ақпарат ескертусіз өзгертілуі мүмкін.

Қатысты құжаттар - 24097

Алдын алаview LEDVANCE T4 ықшам флуоресцентті бағдарламаланған жылдам іске қосу балласты LTP2X26CFUNVDM
Коммерциялық және институционалдық қолданбаларда 120-277 В жоғары тиімді жарықтандыруға арналған LEDVANCE T4 ықшам флуоресцентті бағдарламаланған жылдам іске қосу балластының (LTP2X26CFUNVDM моделі) техникалық сипаттамалары, қолдану мәліметтері және тапсырыс беру туралы ақпарат.
Алдын алаview PREMIUM QUALITY LIGHTING LED T8 Plug & Go (918XX) Installation Guide
Installation instructions for PREMIUM QUALITY LIGHTING LED T8 Plug & Go lamps (918XX series), including safety warnings, installation steps, and ballast wiring diagrams for fluorescent electronic ballasts.
Алдын алаview Fulham Universal томtage 120-277V жұмыс атына арналған балласт Lamp Үйлесімділік диаграммалары және қосу схемалары
Fulham Universal Vol. үшін жан-жақты үйлесімділік диаграммалары мен қосу диаграммаларыtage 120-277V жұмыс атына арналған балласттар, егжей-тегжейлі lamp әртүрлі балласт үлгілері (WH41-WH45) үшін типтер мен үлгі үйлесімділігі. Пайдалану және орнату бойынша кеңестерді қамтиды.
Алдын алаview LR34235, LR34236, LR34244, LR34245, LR34246 үшін Luxrite LED балластының үйлесімділік тізімі
Luxrite жарықдиодты шамдарына (LR34235, LR34236, LR34244, LR34245, LR34246 үлгілері) арналған үйлесімді электрондық балласттарды табыңыз. Бұл толық тізім 120V, 277V және 347V жүйелерінің үйлесімділігін қамтиды, бұл дұрыс орнату мен өнімділікті қамтамасыз етеді.
Алдын алаview Sunlite LED T8 түтік сериясы Орнату және пайдалану нұсқаулары
Бұл құжат флуоресцентті жарықтандыруды тікелей алмастыратын Sunlite LED T8 түтік сериясын орнату және пайдалану нұсқауларын береді. Ол өнім мүмкіндіктерін, қолданбаларды, қауіпсіздік шараларын, орнату қадамдарын және техникалық қызмет көрсету жазбаларын қамтиды.
Алдын алаview Philips InstantFit LED Lamps балласт үйлесімділігі бойынша нұсқаулық
Philips InstantFit LED T8 l үшін жан-жақты үйлесімділік нұсқаулығыamps, Philips Advance, Grainger, Fulham, General Electric, Osram Sylvania және басқа да өндірушілердің үйлесімді балласттарының тізімін ұсынады. T8, T12, CFL, PL-C/T және T5HO балласттарының бөлшектер нөмірлері мен үйлесімділік мәртебесін табыңыз.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.