Woods 59408WD Outdoor Hard-Wired Post Eye Light Control Instruction Manual

1. Кіріспе

The Woods 59408WD Outdoor Hard-Wired Post Eye Light Control is designed to automatically turn your outdoor lighting on at dusk and off at dawn. This photocell light sensor provides reliable, energy-efficient control for various outdoor light fixtures, ensuring your property is illuminated when needed without manual intervention. It is suitable for hard-wired installations in appropriate enclosures.

2. Қауіпсіздік туралы ақпарат

• ЕСКЕРТУ: Электр тогының соғу қаупі. Орнату немесе қызмет көрсету алдында автоматты ажыратқыштағы немесе сақтандырғыш қорабындағы қуатты ажыратыңыз.
• This device is intended for installation in accordance with the National Electrical Code and local regulations. If you are unsure about wiring, consult a qualified electrician.
• Ensure the device is installed in a dry location or within a weather-resistant enclosure to prevent water damage and ensure safe operation.
• Көрсетілген электрлік көрсеткіштерден асырмаңыз.

3. Пакет мазмұны

• Woods 59408WD Photocell Light Control
• Hardwire Black (integrated wiring)

4. Техникалық сипаттамалар

5. Орнату

5.1 Қажетті құралдар

• Бұрауыш
• Сым аралық
• Wire nuts (appropriate size)
• Электрлік таспа
• Тtagе сынаушы
• Weather-resistant electrical enclosure (if installing outdoors in an exposed location)

5.2 Сымдарды қосу нұсқаулары

МАҢЫЗДЫ: Орнатуды бастамас бұрын автоматты ажыратқышта қуат ӨШІРУЛІ екеніне көз жеткізіңіз.

1. Сымдарды дайындаңыз: Strip approximately 1/2 inch of insulation from the ends of all wires (photocell, incoming power, and light fixture wires).
2. Connect Neutral Wires: қосыңыз ақ сым from the photocell to the incoming white (neutral) wire from your power source and the white (neutral) wire of your light fixture. Secure with a wire nut.
3. Connect Line (Hot) Wire: қосыңыз қара сым from the photocell to the incoming black (hot/line) wire from your power source. Secure with a wire nut.
4. Жүктеме сымын қосу: қосыңыз қызыл сым from the photocell to the black (hot/load) wire of your light fixture. Secure with a wire nut.
5. Қауіпсіз қосылымдар: Ensure all wire nuts are tight and connections are secure. Wrap each wire nut with electrical tape for added insulation and protection.
6. Mount Photocell: Mount the photocell in a location where it will receive natural daylight and is not obstructed by shadows or artificial light sources (e.g., other lights, car headlights) that could interfere with its operation. If installing outdoors, ensure it is within a suitable weather-resistant enclosure.
7. Қуатты қалпына келтіру: Once all connections are secure and the photocell is mounted, restore power at the circuit breaker.

Ескерту: The photocell may have a built-in delay (typically a few seconds to a few minutes) before activating or deactivating to prevent false triggers from transient light changes.

Image: The Woods 59408WD Post Eye Light Control, a compact black unit with a visible light sensor on the front.

Сурет: жақыннан түсірілген view of the photocell sensor on the Woods 59408WD unit, showing the light-sensitive element.

6. Операция

The Woods 59408WD Post Eye Light Control operates automatically based on ambient light levels:

• At Dusk: When natural light levels fall below a certain threshold, the photocell will detect darkness and activate the connected light fixture.
• At Dawn: When natural light levels rise above a certain threshold, the photocell will detect sufficient light and deactivate the connected light fixture.

There is an intentional delay in the switching mechanism (typically a few seconds to a few minutes) to prevent the light from cycling on and off due to temporary shadows, car headlights, or lightning flashes.

7. Техникалық қызмет көрсету

The Woods 59408WD Post Eye Light Control requires minimal maintenance:

• Periodically inspect the photocell sensor for any dirt, dust, or debris that might obstruct its view of ambient light. Gently clean the sensor with a soft, damp қажет болса шүберек.
• Ensure the area around the sensor remains clear of obstructions (e.g., growing foliage, new decorations) that could block natural light.
• Check wiring connections annually for any signs of wear or corrosion, especially in outdoor installations.

8. Ақаулықтарды жою

9. Кепілдік және қолдау

For warranty information or technical support, please refer to the product packaging or contact Woods customer service directly. Keep your purchase receipt as proof of purchase.