Winco Analog Receiving Scale SCAL-820 Instruction Manual

Орнату

1. Қаптаманы ашу: Carefully remove the scale from its packaging. Inspect for any shipping damage.
2. Орналастыру: Place the scale on a stable, flat, and level surface to ensure accurate readings. Avoid placing it near vibrations or drafts.
3. Қорғаныс қаптамасын алып тастаңыз: Locate and remove any internal corrugated cylinders or protective materials that may be securing the weighing mechanism during transit. These are typically found beneath the weighing platform.
4. Масштабты нөлге келтіру: Before first use and periodically thereafter, ensure the scale reads zero when nothing is on the platform. If the needle is not at zero, gently turn the calibration knob, usually located at the bottom front or side of the dial, until the needle aligns with the '0' mark.

Сурет: егжей-тегжейлі view of the scale's weighing platform attachment, highlighting the robust construction and connection points. This area should be checked for any protective packaging during initial setup.

Пайдалану нұсқаулары

1. Салмақ өлшеуге дайындалу: Ensure the scale is on a stable surface and the dial is set to zero. Adjust the zeroing knob if necessary.
2. Орын элементі: Gently place the item to be weighed onto the center of the stainless steel platform.
3. Өлшемді оқу: Observe the red needle on the dial. The outer ring indicates weight in pounds (lbs), and the inner ring indicates weight in kilograms (kg). The scale features graduations of 1 ounce (50g) for precise readings.
4. Элементті жою: Once the weight is recorded, carefully remove the item from the platform.
5. Tare Function (Manual): To weigh multiple ingredients in the same container, place the empty container on the platform, then turn the zeroing knob to reset the needle to zero. Add the first ingredient, record its weight, then reset to zero again before adding the next ingredient.

Image: A close-up of the scale's analog dial, clearly showing the measurement markings for pounds (outer ring) and kilograms (inner ring), along with the red indicator needle. The Winco logo is visible at the bottom of the dial.

Техникалық қызмет көрсету

• Тазалау: The stainless steel platform can be removed and is dishwasher safe for easy cleaning. The main body of the scale should be wiped clean with a damp cloth and mild detergent. Avoid submerging the entire scale in water.
• Сақтау орны: Store the scale in a dry, clean environment.
• Тексеру: Periodically check the scale for any signs of wear or damage. Ensure the platform is securely attached and the dial moves freely.

Ақаулықтарды жою

Техникалық сипаттамалар

• Бренд: Винко
• Үлгі: SCAL-820
• Дисплей түрі: Аналогтық
• Салмақ шегі: 20 фунт (9 килограмм)
• Оқу дәлдігі: 1 унция (50 г)
• Материал: Тот баспайтын болат
• Түсі: White, Steel
• Ерекше ерекшелігі: Dishwasher Safe (Platform)
• Элемент салмағы: 6.3 фунт
• Қосылатын компоненттер: Масштаб
• UPC: 842169122533

Кепілдік және қолдау

For warranty information or technical support regarding your Winco Analog Receiving Scale SCAL-820, please refer to the documentation included with your purchase or visit the official Winco website. You may also contact Winco customer service directly for assistance with product inquiries, parts, or service.

Өндіруші: Winco USA

Байланыс: Келіңіз wincous.com байланыс мәліметтері мен қолдау ресурстары үшін.